PCA9509D中文资料飞利浦数据手册PDF规格书

General description

The PCA9509 is a level translating I2C-bus/SMBus repeater that enables processor low voltage 2-wire serial bus to interface with standard I2C-bus or SMBus I/O. While retaining all the operating modes and features of the I2C-bus system during the level shifts, it also permits extension of the I2C-bus by providing bidirectional buffering for both the data (SDA) and the clock (SCL) lines, thus enabling the I2C-bus or SMBus maximum capacitance of 400 pF on the higher voltage side. The SDA and SCL pins are over-voltage tolerant and are high-impedance when the PCA9509 is unpowered.

Features

■ Bidirectional buffer isolates capacitance and

allows 400 pF on port B of the device

■ Voltage level translation from port A

(1 V to VCC(B) − 1.0 V) to port B (3.0 V to 5.5 V)

■ Requires no external pull-up resistors on lower voltage port A

■ Active HIGH repeater enable input

■ Open-drain inputs/outputs

■ Lock-up free operation

■ Supports arbitration and clock stretching across the repeater

■ Accommodates Standard-mode and Fast-mode I2C-bus devices

and multiple masters

■ Powered-off high-impedance I2C-bus pins

■ Operating supply voltage range of 1.0 V to VCC(B) − 1.0 V on port A,

3.0 V to 5.5 V on port B

■ 5 V tolerant port B SCL, SDA and enable pins

■ 0 Hz to 400 kHz clock frequency

Remark: The maximum system operating frequency may be less than 400 kHz

because of the delays added by the repeater.

■ ESD protection exceeds 2000 V HBM per JESD22-A114, 200 V MM per

JESD22-A115, and 1000 V CDM per JESD22-C101

■ Latch-up testing is done to JEDEC Standard JESD78 which exceeds 100 mA

■ Packages offered: TSSOP8, SO8