PAC1921中文资料High-Side current sensor with configurable analog output, I2C, 32V, power calculation, adjustable for microcontroller voltages数据手册Microchip规格书

描述 Description

The PAC1921 is a dedicated power-monitoring device with a configurable analog output that can present power, current or voltage. All information is also provided on the 2-wire/I2C© compatible interface.  The PAC1921 is designed for power measurement and diagnostic systems that cannot allow for latency when performing high-speed power management. The device is 0.4% accurate for current readings and 1% accurate for power readings.

     Measurements are accumulated in large registers, allowing for integration periods of 500 μs to 2.9 seconds. The measurement is averaged and presented on the analog output with a full scale range of 3V, 2V, 1.5V, or 1.0V.

     The PAC1921 has a READ/INT pin for host control of the measurement integration period. This pin can be used to synchronize readings of multiple buses between several devices. Data sampling and output attributes, such as the internal ADC resolution (11-bit or 14-bit) and sample rate, are configurable.   The device can monitor power rails from 0-32V with a full-scale capability of 100 mV across the sense resistor. No input filters are required for this device.

特性 Features

•Configurable Measurement Type Output: Power,Current or Bus Voltage
•  All output values also available over SMBus>
• Provides integrated average powermeasurement
• Power measurements provided tomicro-controller with ADC inputs
• Output voltage proportional to selectedmeasurement>
• 100 mV full-scale current sense voltage range
• Second-order delta-sigma ADC with 11-bit or14-bit resolution
• Selectable current binary gain ranges: 1xthrough 128x>
•1% Power Measurement Accuracy
•Auto-Zero Offset>
•Auto Sleep State>- Automatically shifts to low-power state(3.5 μA)
•VDD = 3.3V nominal (operational range 3.0Vto 5.5V)>
•Bus Range 0V to 32V>
•No Input Filters Required>
•10-pin 3 mm x 3 mm VDFN RoHSCompliant Package

简介

PAC1921属于集成电路（IC）的电流调节/管理。由Microchip制造生产的PAC1921电流调节/管理电流调节和管理 IC 是用于监视和调节电路电流的半导体器件。功能包括电流表、限流、电流镜、电流监控器、电流调节器、电流纹波抑制器、电流检测、电流源、电流开关和电子保险丝，电流输出从 100 μA 至 50 A 可调。