RAIL TO RAIL I/O,HIGH-SLEW-RATE OP AMP

DESCRIPTION The UTC PA3211 is an input/output rail-to-rail operational amplifier. This device can be operated on either a single supply varying from +3V to +5.5V or dual supply ranging from ±1.5V to ±2.75V. The UTC PA3211 has a perfect AC performance with 6.5MHz bandwidth, 5.23V/μs slew rate. T

文件：138.94 Kbytes 页数：5 Pages

UTC

友顺

ISL6844 Reference Design: ISL6844EVAL3Z

The ISL6840, ISL6841, ISL6842, ISL6843, ISL6844, ISL6845 family of adjustable frequency, low power, pulse width modulating (PWM) current mode controllers is designed for a wide range of power conversion applications including boost, flyback, and isolated output configurations. Peak current mode co

文件：531.41 Kbytes 页数：10 Pages

Intersil

POWER OPERATIONAL AMPLIFIERS

[Apex] DESCRIPTION The PA34 consist of a monolithic power op amp in a 7-pin T0220 package. The wide common mode input range includes the negative rail, facilitating single supply applications. It is possible to have a “ground based” input driving a single supply amplifi er with ground acting as

文件：66.32 Kbytes 页数：5 Pages

ETCList of Unclassifed Manufacturers

未分类制造商

High Voltage Power Operational Amplifier

FEATURES ♦ RoHS COMPLIANT ♦ MONOLITHIC MOS TECHNOLOGY ♦ LOW COST ♦ HIGH VOLTAGE OPERATION – 350V ♦ LOW QUIESCENT CURRENT TYP. – 2.2mA ♦ NO SECOND BREAKDOWN ♦ HIGH OUTPUT CURRENT – 120 mA PEAK APPLICATIONS ♦ TELEPHONE RING GENERATOR ♦ PIEZO ELECTRIC POSITIONING ♦ ELECTROSTATIC TRANSDUCER

文件：497.12 Kbytes 页数：7 Pages

Apex

High Voltage Power Operational Amplifier

FEATURES ♦ RoHS COMPLIANT ♦ MONOLITHIC MOS TECHNOLOGY ♦ LOW COST ♦ HIGH VOLTAGE OPERATION – 350V ♦ LOW QUIESCENT CURRENT TYP. – 2.2mA ♦ NO SECOND BREAKDOWN ♦ HIGH OUTPUT CURRENT – 120 mA PEAK APPLICATIONS ♦ TELEPHONE RING GENERATOR ♦ PIEZO ELECTRIC POSITIONING ♦ ELECTROSTATIC TRANSDUCER

文件：497.12 Kbytes 页数：7 Pages

Apex

Dual USB Power Control Switch with Over-Current/Voltage Protection

Features 2 independent switches Individual open-drain fault flag pins 2.7V to 5.5V input 500mA continuous load current per port 140mΩ maximum on-resistance 1µA Maximum Standby Supply Current Thermal shutdown Undervoltage lockout (UVLO) Active-high or active-low enable ve

文件：235.87 Kbytes 页数：3 Pages

PROTEC

Dual USB Power Control Switch with Over-Current/Voltage Protection

Features 2 independent switches Individual open-drain fault flag pins 2.7V to 5.5V input 500mA continuous load current per port 140mΩ maximum on-resistance 1µA Maximum Standby Supply Current Thermal shutdown Undervoltage lockout (UVLO) Active-high or active-low enable ve

文件：235.87 Kbytes 页数：3 Pages

PROTEC

Dual USB Power Control Switch with Over-Current/Voltage Protection

Features 2 independent switches Individual open-drain fault flag pins 2.7V to 5.5V input 500mA continuous load current per port 140mΩ maximum on-resistance 1µA Maximum Standby Supply Current Thermal shutdown Undervoltage lockout (UVLO) Active-high or active-low enable ve

文件：235.87 Kbytes 页数：3 Pages

PROTEC

0.4廓 Dual SPDT Analog Switch

Description The PA3535/PA3536 are 0..4Ω dual SPDT analog switches designed for low voltage applications. The PA3535/PA3536 has on-resistance matching (less than 0.05Ω @ 2.7 V) and flatness (less than 0.2Ω @ 2.7 V) that is guaranteed, over the entire voltage range. Additionally, low logic thr

文件：168.4 Kbytes 页数：9 Pages

PROTEC

0.4廓 Dual SPDT Analog Switch

Description The PA3535/PA3536 are 0..4Ω dual SPDT analog switches designed for low voltage applications. The PA3535/PA3536 has on-resistance matching (less than 0.05Ω @ 2.7 V) and flatness (less than 0.2Ω @ 2.7 V) that is guaranteed, over the entire voltage range. Additionally, low logic thr

文件：168.4 Kbytes 页数：9 Pages

PROTEC