P8XCE598中文资料飞利浦数据手册PDF规格书

GENERAL DESCRIPTION

The P8xCE598 is a single-chip 8-bit high-performance microcontroller with on-chip CAN-controller, derived from the 80C51 microcontroller family.

It uses the powerful 80C51 instruction set. Figure 1 shows a block diagram of the P8xCE598.

The P8xCE598 is manufactured in an advanced CMOS process, and is designed for use in automotive and general industrial applications. In addition to the 80C51 standard features, the device provides a number of dedicated hardware functions for these applications.

FEATURES

• 80C51 central processing unit (CPU)

• 32 kbytes on-chip ROM, externally expandible to 64 kbytes

• 2 × 256 bytes on-chip RAM, externally expandible to 64 kbytes

• Two standard 16-bit timers/counters

• One additional 16-bit timer/counter coupled to four capture and three compare registers

• 10-bit ADC with 8 multiplexed analog inputs

• Two 8-bit resolution Pulse Width Modulated outputs

• 15 interrupt sources with 2 priority levels

(2 to 6 external interrupt sources possible)

• Five 8-bit I/O ports, plus one 8-bit input port shared with analog inputs

• CAN-controller (CAN = Controller Area Network) with DMA data transfer facility to internal RAM

• 1 Mbit/s CAN-controller with bus failure management facility

• 1⁄2AVDD reference voltage

• Full-duplex UART compatible with the standard 80C51

• On-chip Watchdog Timer (WDT)

• 1.2 to 16 MHz clock frequency

• Improved Electromagnetic Compatibility (EMC).