P83CL882T/001中文资料飞利浦数据手册PDF规格书

GENERAL DESCRIPTION

The P83CL882 is manufactured in an advanced CMOS technology. The P83CL882 is a member of the VTELX family of low-power, low-voltage 80CL51 microcontrollers with advanced features for telecom applications. The Philips exclusive, asynchronous handshaking technology has been used for the CPU implementation which makes the CPU to run at its ma

FEATURES

• Full static asynchronous handshake 80C51 CPU; enhanced 8-bit architecture with:

– Standard 80C51 instruction set

– CPU speed independent of clock frequency, average speed: 4.8 Mips at 3.0 V

– Non-page oriented instructions

– Direct addressing

– Four 8-byte RAM register banks

– Stack depth limited only by available internal RAM (maximum 128 bytes)

– Multiply, divide, subtract and compare instructions.

• 17 source, 17 vector interrupt structure with two priority levels, polarity and sensitivity choice

• 24 general purpose I/O pins

• Timer 0 and 1: two standard 16-bit timer/event counters

• Timer 2: 16-bit timer/event counter with capture, compare and auto-reload function

• Watchdog Timer

• Wake-up counter

• Idle and Power-down modes

• 4-kbyte ROM: mask programmed read only memory

• Supply voltage: 1.8 to 3.6 V

• 128 bytes RAM

• Internal crystal oscillator

• Reset I/O pin for external reset from master or to slave

• MSK modem including Manchester encoder/decoder with 2 digital outputs (by SW) for analog cordless telephones (standards CT0/CT1/CT1+)

• I2C-bus master/slave (transmitter/receiver, maximum frequency 400 kHz).