P83C591VFA中文资料恩XP数据手册PDF规格书

1 FEATURES

1.1 80C51 Related Features of the 8xC591

• Full static 80C51 Central Processing Unit available as

OTP, ROM and ROMless

• 16 Kbytes internal Program Memory expandable

externally to 64 Kbytes

• 512 bytes on-chip Data RAM expandable externally to

64 Kbytes

• Three 16-bit timers/counters T0, T1 (standard 80C51)

and additional T2 (capture & compare)

• 10-bit ADC with 6 multiplexed analog inputs with fast

8-bit ADC option

• Two 8-bit resolution, Pulse Width Modulated outputs

• 32 I/O port pins in the standard 80C51 pinout

• I2C-bus serial I/O port with byte oriented master and

slave functions

• On-chip Watchdog Timer T3

• Extended temperature range: −40 to +85°C

• Accelerated (prescaler 1:1) instruction cycle time

500 ns @ 12 MHz

• Operation voltage range: 5 V ± 5

• Security bits:

– ROM version has 2 bits

– OTP/EPROM version has 3 bits

• 32 bytes Encryption array

• 4 level priority interrupt, 15 interrupt sources

• Full-duplex enhanced UART with programmable

Baudrate Generator

• Power Control Modes:

– Clock can be stopped and resumed

– Idle Mode

– Power-down Mode

• ADC active in Idle Mode

• Second DPTR register

• ALE inhibit for EMI reduction

• Programmable I/O port pins (pseudo bi-directional,

push-pull, high impedance, open drain)

• Wake-up from Power-down by external interrupts

• Software reset bit (AUXR1.5)

• Low active reset pin

• Power-on detect reset

• Once mode

1.2 CAN Related Features of the 8xC591

• CAN 2.0B active controller, supporting 11-bit Standard

and 29-bit Extended indentifiers

• 1 Mbit/s CAN bus speed with 8 MHz clock achievable

• 64 byte receive FIFO (can capture sequential Data

Frames from the same source as required by the

Transport Layer of higher protocols such as DeviceNet,

CANopen and OSEK)

• 13 byte transmit buffer

• Enhanced PeliCAN core (from the SJA1000 stand-alone

CAN2.0B controller)

1.2.1 PELICAN FEATURES

• Four independently configurable Screeners

(Acceptance Filters)

• Each Screener has two 32-bit specifies:

– 32-bit Match and

– 32-bit Mask

• 32-bits of Mask per Screener allows unique Group

addressing per Screener

• Higher layer protocols especially supported in Standard

CAN format with:

– Up to four, 11-bit ID Screeners that also Screen the

two (2) Data Bytes

– i.e., Data Frames are Screened by the CAN ID and by

Data Byte content

• Up to eight, 11-bit ID Screeners half of which also

Screen the first Data Byte

• All Screeners are changeable “on the fly”

• Listen Only Mode, Self Test Mode

• Error Code Capture, Arbitration Lost Capture, readable

Error Counters

2 GENERAL DESCRIPTION

The P8xC591 is a single-chip 8-bit-high-performance

microcontroller, with on-chip CAN-controller, derived from

the 80C51 microcontroller family.

It uses the powerful 80C51 instruction set and includes the

successful PeliCAN functionality of the SJA1000 CAN

controller from Philips Semiconductors.

The fully static core provides extended power save

provisions as the oscillator can be stopped and easily

restarted without loss of data. The improved internal clock

prescaler of 1:1 achieves a 500 ns instruction cycle time at

12 MHz external clock rate.

Figure 1 shows a Block Diagram of the P8xC591. The

microcontroller is manufactured in an advanced CMOS

process, and is designed for use in automotive and

general industrial applications. In addition to the 80C51

standard features, the device provides a number of

dedicated hardware functions for these applications.

Two versions of the P8xC591 will be offered:

• P83C591 (with ROM)

• P87C591 (with OTP)

Hereafter these versions will be referred to as P8xC591.

The temperature range includes (max. fCLK = 12 MHz):

• -40 to +85 °C version, for general applications

The P8xC591 combines the functions of the P87C554

(microcontroller) and the SJA1000 (stand-alone

CAN-controller) with the following enhanced features:

• Enhanced CAN receive interrupt (level sensitive)

• Extended acceptance filter

• Acceptance filter changeable “on the fly”.

The main differences between P8xC591 and P87C554

are:

• CAN-controller on chip

• 6-input ADC

• Low active Reset

• 44 leads.