P82B96T中文资料飞利浦数据手册PDF规格书

DESCRIPTION

The P82B96 is a bipolar IC that creates a non-latching, bi-directional, logic interface between the normal I2C-bus and a range of other bus configurations. It can interface I2C-bus logic signals to similar buses having different voltage and current levels.

For example it can interface to the 350 µA SMB bus, to 3.3 V logic devices, and to 15 V levels and/or low impedance lines to improve noise immunity on longer bus lengths.

FEATURES

• Bi-directional data transfer of I2C-bus signals

• Isolates capacitance allowing 400 pF on Sx/Sy side and 4000 pF on Tx/Ty side

• Tx/Ty outputs have 60 mA sink capability for driving low impedance or high capacitive buses

• 400 kHz operation over at least 20 meters of wire (see AN10148)

• Supply voltage range of 2 V to 15 V with I2C logic levels on Sx/Sy side independent of supply voltage

• Splits I2C signal into pairs of forward/reverse Tx/Rx, Ty/Ry signals for interface with opto-electrical isolators and similar devices that need uni-directional input and output signal paths.

• Low power supply current

• ESD protection exceeds 3500 V HBM per JESD22-A114, 250 V DIP package / 400 V SO package MM per JESD22-A115, and 1000 V CDM per JESD22-C101

• Latch-up free (bipolar process with no latching structures)

• Packages offered: DIP, SO, and TSSOP

TYPICAL APPLICATIONS

• Interface between I2C buses operating at different logic levels (e.g., 5 V and 3 V or 15 V)

• Interface between I2C and SMB (350 µA) bus standard.

• Simple conversion of I2C SDA or SCL signals to multi-drop differential bus hardware, e.g., via compatible PCA82C250.

• Interfaces with Opto-couplers to provide Opto isolation between I2C-bus nodes up to 400 kHz.