P80C32X2BN中文资料飞利浦数据手册PDF规格书

DESCRIPTION

The Philips microcontrollers described in this data sheet are high-performance static 80C51 designs incorporating Philips’ high-density CMOS technology with operation from 2.7 V to 5.5 V.

They support both 6-clock and 12-clock operation. The 8xC31X2/51X2 and 8xC32X2/52X2/54X2/58X2 contain 128 byte RAM and 256 byte RAM respectively, 32 I/O lines, three 16-bit counter/timers, a six-source, four-priority level nested interrup structure, a serial I/O port for either multi-processor communications, I/O expansion or full duplex UART, and on-chip

oscillator and clock circuits.

FEATURES

• 80C51 Central Processing Unit

–4 kbytes ROM/EPROM (80/87C51X2)

–8 kbytes ROM/EPROM (80/87C52X2)

–16 kbytes ROM/EPROM (80/87C54X2)

–32 kbytes ROM/EPROM (80/87C58X2)

–128 byte RAM (80/87C51X2 and 80C31X2)

–256 byte RAM (80/87C52/54X2/58X2 and 80C32X2)

–Boolean processor

–Fully static operation

–Low voltage (2.7 V to 5.5 V at 16 MHz) operation

• 12-clock operation with selectable 6-clock operation

• Memory addressing capability

–64 kbytes ROM and 64 kbytes RAM

• Power control modes:

–Clock can be stopped and resumed

–Idle mode

–Power-down mode

• CMOS and TTL compatible

• Two speed ranges at VCC= 5 V

–0 to 30 MHz with 6-clock operation

–0 to 33 MHz with 12-clock operation