丝印：OQ；Package：DSBGA；TMP119 Ultra-High Accuracy, Low-Power, Digital Temperature Sensor With SMBus™- and I2C-Compatible Interface

1 Features • TMP119 high-accuracy temperature sensor – ±0.03°C (typical) from 0°C to 45°C – ±0.08°C (maximum) from 0°C to 45°C – ±0.09°C (maximum) from –25°C to 85°C – ±0.12°C (maximum) from –40°C to 85°C – ±0.15°C (maximum) from –55°C to 125°C – ±0.2°C (maximum) from –55°C to 150°C • Oper

文件：1.20735 Mbytes 页数：48 Pages

TI

德州仪器

SDH/SONET STM16/OC48 multiplexer

GENERAL DESCRIPTION The OQ2535HP is a 32-channel multiplexer intended for use in STM16/OC48 applications. It combines data from a total of 32 × 78 Mbits/s input channels onto a single 2.5 Gbits/s output channel. It features 3.3 V TTL data inputs and a 5 V TTL clock output at the low speed interfa

文件：108.69 Kbytes 页数：19 Pages

PHI

飞利浦

SDH/SONET STM16/OC48 demultiplexer

DESCRIPTION The OQ2536HP is a 32-channel demultiplexer intended for use in STM16/OC48 applications. It demultiplexes a single 2.5 Gbits/s input channel to 32 × 78 Mbits/s output channels. The data and clock outputs on the low speed interface are GTL compatible, while the high speed data and clock

文件：127.88 Kbytes 页数：20 Pages

PHI

飞利浦

SDH/SONET STM16/OC48 main amplifiers

GENERAL DESCRIPTION The OQ2538HP is a limiting amplifier IC intended for use as the main amplifier in 2.5 Gbits/s Non-Return to Zero (NRZ) transmission systems (SDH/SONET). Comprised of four amplifier stages with a total gain of 48.5 dB, it provides for a wide input signal dynamic range at a

文件：167.28 Kbytes 页数：24 Pages

PHI

飞利浦

SDH/SONET STM16/OC48 main amplifiers

GENERAL DESCRIPTION The OQ2538HP is a limiting amplifier IC intended for use as the main amplifier in 2.5 Gbits/s Non-Return to Zero (NRZ) transmission systems (SDH/SONET). Comprised of four amplifier stages with a total gain of 48.5 dB, it provides for a wide input signal dynamic range at a

文件：167.28 Kbytes 页数：24 Pages

PHI

飞利浦

SDH/SONET data and clock recovery unit STM1/4/16 OC3/12/48 GE

DESCRIPTION The OQ2541 is a data and clock recovery IC intended for use in Synchronous Digital Hierarchy (SDH) and Synchronous Optical Network (SONET) systems. The circuit recovers data and extracts the clock signal from an incoming bitstream up to 2.5 Gbits/s. It can be configured for use in STM

文件：172.04 Kbytes 页数：36 Pages

PHI

飞利浦

SDH/SONET data and clock recovery unit STM1/4/16 OC3/12/48 GE

DESCRIPTION The OQ2541 is a data and clock recovery IC intended for use in Synchronous Digital Hierarchy (SDH) and Synchronous Optical Network (SONET) systems. The circuit recovers data and extracts the clock signal from an incoming bitstream up to 2.5 Gbits/s. It can be configured for use in STM

文件：172.04 Kbytes 页数：36 Pages

PHI

飞利浦

SDH/SONET STM16/OC48 laser drivers

GENERAL DESCRIPTION The OQ2545 is a driver IC intended to be used with a directly modulated laser diode or with an Electro Absorption Modulator (EAM) in SDH/SONET 2.5 Gbits/s optical transmission systems. FEATURES • Differential 50 Ω inputs for direct connection to Current-Mode Logic (CML) outp

文件：688.98 Kbytes 页数：28 Pages

PHI

飞利浦

SDH/SONET STM16/OC48 laser drivers

GENERAL DESCRIPTION The OQ2545 is a driver IC intended to be used with a directly modulated laser diode or with an Electro Absorption Modulator (EAM) in SDH/SONET 2.5 Gbits/s optical transmission systems. FEATURES • Differential 50 Ω inputs for direct connection to Current-Mode Logic (CML) outp

文件：688.98 Kbytes 页数：28 Pages

PHI

飞利浦

Digital Servo Driver DSD-2

GENERAL DESCRIPTION The OQ8844 or Digital Servo Driver 2 (DSD2) consists of 1-bit class-D power drivers, which are specially designed for digital servo applications. Three such amplifiers are integrated in one chip, to drive the focus and radial actuators and the sledge motor of a compact disc op

文件：80.7 Kbytes 页数：16 Pages

PHI

飞利浦