OPT101中文资料单片光电二极管和单电源跨阻放大器数据手册TI规格书

描述 Description

The OPT101 is a monolithic photodiode with on-chip transimpedance amplifier. The integrated combination of photodiode and transimpedance amplifier on a single chip eliminates the problems commonly encountered in discrete designs, such as leakage current errors, noise pick-up, and gain peaking as a result of stray capacitance. Output voltage increases linearly with light intensity. The amplifier is designed for single or dual power-supply operation. The 0.09 inch × 0.09 inch (2.29 mm × 2.29 mm) photodiode operates in the photoconductive mode for excellent linearity and low dark current.The OPT101 operates from 2.7 V to 36 V supplies and quiescent current is only 120 µA. This device is available in clear plastic 8-pin PDIP, and J-lead SOP for surface mounting. The temperature range is 0°C to 70°C.

The OPT101 is a monolithic photodiode with on-chip transimpedance amplifier. The integrated combination of photodiode and transimpedance amplifier on a single chip eliminates the problems commonly encountered in discrete designs, such as leakage current errors, noise pick-up, and gain peaking as a result of stray capacitance. Output voltage increases linearly with light intensity. The amplifier is designed for single or dual power-supply operation. The 0.09 inch × 0.09 inch (2.29 mm × 2.29 mm) photodiode operates in the photoconductive mode for excellent linearity and low dark current.The OPT101 operates from 2.7 V to 36 V supplies and quiescent current is only 120 µA. This device is available in clear plastic 8-pin PDIP, and J-lead SOP for surface mounting. The temperature range is 0°C to 70°C.

特性 Features

• Single Supply: 2.7 to 36 V
• Photodiode Size: 0.090 inch × 0.090 inch (2.29 mm × 2.29 mm)
• Internal 1-MΩ Feedback Resistor
• High Responsivity: 0.45 A/W (650 nm)
• Bandwidth: 14 kHz at RF = 1 MΩ
• Packages: Clear Plastic 8-pin PDIP and J-Lead SOP

简介

OPT101属于传感器变送器的光学传感器-环境光IR红外线UV紫外线传感器。由TI制造生产的OPT101光学传感器 - 环境光，IR 红外线，UV 紫外线传感器环境光、红外和紫外线光学传感器将相应的光和/或热输入转换为模拟或数字输出，并提供多种表面贴装和通孔封装类型。此类传感器的波长范围为 290 nm 至 4000 K。