OPB827C传感器变送器的光学传感器-光电遮断器-槽型-晶体管输出规格书PDF中文资料

OPB827C属于传感器变送器的光学传感器-光电遮断器-槽型-晶体管输出。由梯梯电子集成制造服务(苏州)有限公司制造生产的OPB827C光学传感器 - 光电遮断器 - 槽型 - 晶体管输出具有晶体管输出的槽型光断续器是利用内置红外光源和以气隙（槽）隔开的光电二极管的光学传感器模块。当致动器、液体或其他检测物体挡住光源时，将打开或关闭输出晶体管，从而切换施加的电压。安装方式包括底座、卡入、表面、自由悬挂和通孔安装。

Description:

Each OPB827, OPB828 and OPB829 device consists of an infrared emitting diode (LED, 890 nm center wavelength) and a NPN silicon phototransistor, mounted on opposite sides of a 0.125” (3.18 mm) wide slot in a low-cost black plastic housing. A variety of aperture sizes are offered (see chart below). The OPB827 and OPB828 are designed fro PCBoard mounting with a minimum lead length of 0.35” (8.9 mm) while the OPB829Z (wire version) has 24-inch 26 AWG wire leads. Phototransistor switching occurs when an opaque object passes through the slot.

The OPB827 is offered with 0.305” (7.75 mm) and the OPB828 is offered with 0.220” (5.59 mm) lead spacing for PCBoard mounting. The OPB829Z has 24” (61 cm) 26 AWG wire leads for remote mounting.

Features:

● 0.125” (3.18 mm) wide, 0.315” (8.00 mm) deep slot

● 0.305” (7.75 mm) lead spacing (OPB827)

● 0.220” (5.59 mm) lead spacing (OPB828)

● 24-inch 26 AWG wire leads (OPB829)

● Inexpensive plastic housing

Applications:

● Non-contact object sensing

● Assembly line automation

● Machine automation

● Equipment safety

● Machine safety