OPA353中文资料德州仪器数据手册PDF规格书

FEATURES

LOW INPUT NOISE VOLTAGE: 1.8nV/√Hz

HIGH UNITY-GAIN BANDWIDTH: 230MHz

HIGH GAIN BANDWIDTH PRODUCT: 125MHz

HIGH OUTPUT CURRENT: 350mA

LOW INPUT OFFSET VOLTAGE: ±0.2mV

FLEXIBLE SUPPLY RANGE:

Single +5V to +12V Operation

Dual ±2.5V to ±6V Operation

LOW SUPPLY CURRENT: 6.0mA/ch

APPLICATIONS

xDSL DIFFERENTIAL LINE DRIVERS

16-BIT ADC DRIVER

LOW NOISE PLL INTEGRATORS

TRANSIMPEDANCE AMPLIFIERS

PRECISION BASEBAND I/Q AMPLIFIERS

ACTIVE FILTERS

TS613 IMPROVED REPLACEMENT

DESCRIPTION

The OPA2613 offers very low 1.8nV√Hz input noise in a

wideband, unity-gain stable, voltage-feedback

architecture. Intended for xDSL driver applications, the

OPA2613 also supports this low input noise with

exceptionally low harmonic distortion, particularly in

differential configurations. Adequate output current is

provided to drive the potentially heavy load of a

twisted-pair line. Harmonic distortion for a 2VPP differential

output operating from +5V to +12V supplies is ≤ −95dBc

through 1MHz input frequencies. Operating on a low

6.0mA/ch supply current, the OPA2613 can satisfy most

xDSL driver requirements over a wide range of possible

supply voltagefrom a single +5V condition, to ±5V, on up

to a single +12V design.

General-purpose applications on a single +5V supply will

benefit from the high input and output voltage swing

available on this reduced supply voltage. Low-cost

precision integrators for PLLs will also benefit from the low

voltage noise and offset voltage. Baseband I/Q receiver

channels can achieve almost perfect channel match with

noise and distortion to support signals through 5MHz with

> 14-bit dynamic range.