OPA320AQDBVRQ1.B中文资料德州仪器数据手册PDF规格书

1 Features

1• Qualified for Automotive Applications

• AEC-Q100 Qualified with the Following Results:

– Device Temperature Grade 1: –40°C to 125°C

Ambient Operating Temperature Range

– Device HBM ESD Classification Level 2

– Device CDM ESD Classification Level C4B

• Precision with Zero-Crossover Distortion:

– Low Offset Voltage: 150 μV (max)

– High CMRR: 114 dB

– Rail-to-Rail I/O

• Low Input Bias Current: 0.9 pA (max)

• Low Noise: 7 nV/√Hz at 10kHz

• Wide Bandwidth: 20 MHz

• Slew Rate: 10 V/μs

• Quiescent Current: 1.45 mA/ch

• Single-Supply Voltage Range: 1.8 to 5.5 V

• Unity-Gain Stable

• Small VSSOP Package

2 Applications

• Automotive

• High-Z Sensor Signal Conditioning

• Transimpedance Amplifiers

• Test and Measurement Equipment

• Programmable Logic Controllers (PLCs)

• Motor Control Loops

• Communications

• Input and Output ADC and DAC Buffers

• Active Filters

3 Description

The OPA320-Q1 and OPA2320-Q1 (OPAx320-Q1)

devices are a new generation of precision low-voltage

CMOS operational amplifiers (op amps) optimized for

very low noise and wide bandwidth. These devices

operate on a low quiescent current of only 1.45 mA.

The OPAx320-Q1 are an excellent choice for lowpower,

single-supply applications. Low-noise (7

nV/√Hz) and high-speed operation also makes these

devices an excellent choice for driving sampling

analog-to-digital converters (ADCs). Other

applications include signal conditioning and sensor

amplification.

The OPAx320-Q1 feature a linear input stage with

zero-crossover distortion that delivers excellent

common-mode rejection ratio (CMRR) of 114 dB

(typical) over the full input range. The input commonmode

range extends 100 mV beyond the negative

and positive supply rails. The output voltage typically

swings within 10 mV of the rails.

In addition, the OPAx320-Q1 have a wide supply

voltage range from 1.8 V to 5.5 V, with excellent

PSRR (106 dB) over the entire supply range. These

features make the OPAx320-Q1 suitable for

precision, low-power applications that run directly

from batteries without regulation.

The OPAx320-Q1 device is available in an 8-pin

VSSOP (DGK) package.