Low Voltage Micropower Quad Operational Amplifier

GENERAL DESCRIPTION The OP490 is a high-performance micropower quad op amp that operates from a single supply of 1.6 V to 36 V or from dual supplies of ±0.8 V to ±18 V. Input voltage range includes the negative rail allowing the OP490 to accommodate input signals down to ground in single-supply

文件：1.82233 Mbytes 页数：16 Pages

AD

亚德诺

Low Voltage, Micropower, Quad Operational Amplifier

GENERAL DESCRIPTION The OP490 is a high-performance micropower quad op amp that operates from a single supply of 1.6 V to 36 V or from dual supplies of ±0.8 V to ±18 V. Input voltage range includes the negative rail allowing the OP490 to accommodate input signals down to ground in single-supply

文件：226.6 Kbytes 页数：16 Pages

AD

亚德诺

Low Voltage Micropower Quad Operational Amplifier

DESCRIPTION: Maxwell Technologies’ OP490 micropower quad operational amplifier microcircuit features Maxwell’s radiation-hardened RAD-PAK® packaging technology, the OP490 has an extremely low input offset voltage no less than 0.5 mV with a drift of under 5 µV/°C, guaranteed over the full milita

文件：249.78 Kbytes 页数：9 Pages

MAXWELL

OP490

OP490是一款高性能、微功耗、四通道运算放大器，采用1.6 V至36 V单电源或±0.8 V至±18 V双电源供电。输入电压范围包括负供电轨，因而在单电源系统中，该器件可以处理低至地电压的输入信号。采用单电源供电时，其输出摆幅也包括地电压，因此可以实现零入零出式操作。\n\n OP490每个放大器耗用的静态电源电流均低于20 µA，但却能够向负载提供5 mA以上的输出电流。输入失调电压低于0.5 mV。增益大于400,000，共模抑制(CMR)优于90 dB。电源抑制比(PSRR)小于5.6 µV/V，所以电池供电系统的失调电压变化极小。\n\n OP490集高性能与四通 • 单/双电源供电：\n1.6 V至36 V\n±0.8 V至 ±18 V\n\n• 单电源供电时，输入和输出电压包括地电压\n\n• 低电源电流：80 μA（最大值）\n\n• 高输出驱动电流：5 mA（最小值）\n\n• 低失调电压：1.0 mA（最大值）\n\n• 高开环增益：800 V/mV（典型值）\n\n• 符合工业标准的四边引脚排列;

ADI

亚德诺

Low Voltage Micropower Quad Operational Amplifier

GENERAL DESCRIPTION The OP490 is a high-performance micropower quad op amp that operates from a single supply of 1.6 V to 36 V or from dual supplies of ±0.8 V to ±18 V. Input voltage range includes the negative rail allowing the OP490 to accommodate input signals down to ground in single-supply

文件：1.82233 Mbytes 页数：16 Pages

AD

亚德诺

Low Voltage Micropower Quad Operational Amplifier

GENERAL DESCRIPTION The OP490 is a high-performance micropower quad op amp that operates from a single supply of 1.6 V to 36 V or from dual supplies of ±0.8 V to ±18 V. Input voltage range includes the negative rail allowing the OP490 to accommodate input signals down to ground in single-supply

文件：1.82233 Mbytes 页数：16 Pages

AD

亚德诺

Low Voltage Micropower Quad Operational Amplifier

GENERAL DESCRIPTION The OP490 is a high-performance micropower quad op amp that operates from a single supply of 1.6 V to 36 V or from dual supplies of ±0.8 V to ±18 V. Input voltage range includes the negative rail allowing the OP490 to accommodate input signals down to ground in single-supply

文件：1.82233 Mbytes 页数：16 Pages

AD

亚德诺

Low Voltage Micropower Quad Operational Amplifier

GENERAL DESCRIPTION The OP490 is a high-performance micropower quad op amp that operates from a single supply of 1.6 V to 36 V or from dual supplies of ±0.8 V to ±18 V. Input voltage range includes the negative rail allowing the OP490 to accommodate input signals down to ground in single-supply

文件：1.82233 Mbytes 页数：16 Pages

AD

亚德诺

Low Voltage Micropower Quad Operational Amplifier

GENERAL DESCRIPTION The OP490 is a high-performance micropower quad op amp that operates from a single supply of 1.6 V to 36 V or from dual supplies of ±0.8 V to ±18 V. Input voltage range includes the negative rail allowing the OP490 to accommodate input signals down to ground in single-supply

文件：1.82233 Mbytes 页数：16 Pages

AD

亚德诺

Low Voltage Micropower Quad Operational Amplifier

GENERAL DESCRIPTION The OP490 is a high-performance micropower quad op amp that operates from a single supply of 1.6 V to 36 V or from dual supplies of ±0.8 V to ±18 V. Input voltage range includes the negative rail allowing the OP490 to accommodate input signals down to ground in single-supply

文件：1.82233 Mbytes 页数：16 Pages

AD

亚德诺