Precision Rail-to-Rail Input & Output Operational Amplifiers

GENERAL DESCRIPTION The OP184/OP184/OP284/OP484 are single, dual and quad single-supply, 4 MHz bandwidth amplifiers featuring rail-to-rail inputs and outputs. They are guaranteed to operate from +3 to +36 (or ±1.5 to ±18) volts and will function with a single supply as low as +1.5 volts. These

文件：291.83 Kbytes 页数：20 Pages

AD

亚德诺

Precision Rail-to-Rail Input and Output Operational Amplifiers

FEATURES Single-supply operation Wide bandwidth: 4 MHz Low offset voltage: 65 μV Unity-gain stable High slew rate: 4.0 V/μs Low noise: 3.9 nV/√Hz APPLICATIONS Battery-powered instrumentation Power supply control and protection Telecommunications DAC output amplifier ADC input

文件：675.95 Kbytes 页数：24 Pages

AD

亚德诺

Operational Amplifiers

DESCRIPTION: Maxwell Technologies’ OP284 is a dual single-supply, 4 MHz bandwidth amplifier featuring rail-to-rail inputs and outputs and a greater than 100 krad (Si) total dose tolerance,depending upon space mission. Using Maxwell Technologies’ radiation-hardened RAD-PAK® technology, it is guara

文件：861.29 Kbytes 页数：16 Pages

MAXWELL

TORQUE PRODUCTS

文件：3.50277 Mbytes 页数：32 Pages

ETCList of Unclassifed Manufacturers

未分类制造商

Technical Article

文件：248.36 Kbytes 页数：5 Pages

AD

亚德诺

Precision Rail-to-Rail Input & Output Operational Amplifiers

文件：522.84 Kbytes 页数：20 Pages

AD

亚德诺

Precision Rail-to-Rail Input and Output Operational Amplifiers

文件：508.22 Kbytes 页数：24 Pages

AD

亚德诺

精密RRIO双通道运算放大器

OP184 / OP284 / OP484分别是单通道/双通道/四通道、单电源、4 MHz带宽放大器，具有轨到轨输入与输出特性。保证工作电压范围为+3 V至+36 V（或±1.5 V至±18 V），可以采用低至+1.5 V的单电源工作。\n\n 这些放大器非常适合要求交流性能与精密直流性能的单电源应用。带宽、低噪声与精度特性组合，则使之适合滤波器和仪器仪表等各种应用。\n\n 其它应用包括便携式电信设备、电源控制与保护，以及用作具有宽输出范围传感器的放大器或缓冲器。要求采用轨到轨输入放大器的传感器包括霍尔效应传感器、压电传感器和阻性传感器。\n\n 利用轨到轨输入 • 单电源供电 \n\n• 宽带宽：4 MHz \n\n• 低失调电压：65 µV \n\n• 单位增益稳定 \n\n• 高压摆率：4.0 V/µs \n\n• 低噪声：3.9 nV/√Hz \n\n• 请参阅数据表了解更多信息;

ADI

亚德诺

Dual Operational Amplifier

DESCRIPTION: Maxwell Technologies’ OP284A is a dual single-supply, 4 MHz bandwidth amplifier featuring rail-to-rail inputs and outputs. Using Maxwell Technologies’ radiation-hardened RADPAK® technology, it is guaranteed to operate from +3 to +36 (or ±1.5 to ±18) volts and will function with a s

文件：875.39 Kbytes 页数：16 Pages

MAXWELL

Dual Operational Amplifier

DESCRIPTION: Maxwell Technologies’ OP284A is a dual single-supply, 4 MHz bandwidth amplifier featuring rail-to-rail inputs and outputs. Using Maxwell Technologies’ radiation-hardened RADPAK® technology, it is guaranteed to operate from +3 to +36 (or ±1.5 to ±18) volts and will function with a s

文件：875.39 Kbytes 页数：16 Pages

MAXWELL