ONET1191P中文资料11.3Gbps 限幅放大器数据手册TI规格书

描述 Description

The ONET1191P is a high-speed, 3.3-V limiting amplifier for copper-cable and fiber-optic applications with data rates up to 11.3 Gbps. This device provides a gain of about 40 dB which ensures a fully differential output swing for input signals as low as 5 mVpp. The output amplitude can be adjusted from 400 mVpp to 700 mVpp. Loss-of-signal detection and output disable are also provided. The part is available in a small-footprint, 3-mm × 3-mm, 16-pin QFN package, typically dissipates less than 110 mW, and is characterized for operation from -40°C to 85°C.

特性 Features

• Up to 11.3-Gbps Operation
• Loss-of-Signal Detection (LOS)
• Adjustable Output Voltage
• Low Power Consumption
• Input Offset Cancellation
• CML Data Outputs With On-Chip, 50- Back-Termination to VCC
• Single 3.3 V Supply
• Surface-Mount, Small-Footprint, 3-mm × 3-mm, 16-Pin QFN Package
• APPLICATIONS
• 10 Gigabit Ethernet Optical Transmitters
• 8× and 10× Fibre Channel Optical Transmitters
• SONET OC-192/SDH-64 Optical Transmitters
• XFP and SFP+ Transceiver Modules
• XENPAK, XPAK, X2 and 300-Pin MSA Transponder Modules
• Cable Driver and Receiver