NX5P3363UK数据手册恩XP中文资料规格书

描述 Description

The NX5P3363 is a precision adjustable current-limited power switch for USB PD application. The device includes under voltage lockout, over-temperature protection, and reverse current protection circuits to automatically isolate the switch terminals when a fault condition occurs. The 29 V tolerance on VBUS pin ensures the device is able to work on a USB PD port; a current limit input (ILIM) pin defines the over-current limit threshold; an open-drain fault output (FLT) indicates when a fault condition has occurred.
The over-current limit threshold can be programmed from 400 mA to 3.3 A, using an external resistor between the ILIM pin and GND pin. In the overcurrent condition, the device will clamp the output current to the value set by ILIM and keep the switch on while asserting the FLT flag. To minimize current surges during normal turn on, the device has built-in soft start by limiting the power switch turn-on slew rate. However, the user can disable the soft start and request a fast output by pulling FO pin HIGH. A fast RCP recovery circuit has been added to the switch to prevent reverse current flowing back to the power source at all times. When exiting from reverse current protection state, the power MOSFET will turn on within 50 us. The fast RCP recovery ensures the voltage on VBUS doesn’t drop too much in a power source swap application. NX5P3363 is offered in a 2.2 x 2.2 mm, 16 bump WLCSP package.

特性 Features

• VIN supply voltage range from 4.0 V to 5.5 V
• All-time reverse current protection with ultra-fast RCP recovery
• Adjustable current limit from 400 mA to 3.3 A
• Clamped current output in the over-current condition
• 29 V high voltage tolerance on VBUS pin
• Low ON resistance of the power FETs: 35 mΩ (typical) in total
• Surge protection: IEC61000-4-5 exceeds ±80 V on VBUS
• Over temperature protection
• Safety Approvals:
• UL 62368-1, 2nd edition, file no. 20170804-E470128
• IEC 62368-1, 2nd edition, file no. DK-65509-UL
• ESD protection:
• IEC61000-4-2 contact discharge exceeds 8 kV on VBUS
• HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2 kV
• CDM AEC standard Q100-01 (JESD22-C101E) exceeds 500 V
• Specified from -40 °C to +85 °C ambient temperature

应用 Application

Consumer Electronics

• Notebook, ultrabook and desktop

• Tablet and smart phone

• USB PD and Type-C port/hubs