NX5P3001UK数据手册恩XP中文资料规格书

描述 Description

The NX5P3001 is an advanced bidirectional power switch and ESD-protection device forcombined USB‑OTG and charger port applications. It includes undervoltage lockout,overvoltage lockout and overtemperature protection circuits designed to automaticallyisolate the power switch terminals when a fault condition occurs.
The device features two power switch input/output terminals (VBUSI and VBUSO), anopen-drain acknowledge output (ACK), an enable input which includes logic leveltranslation (EN) and low capacitance Transient Voltage Suppression (TVS) typeESD‑clamps for USB data and ID pins.
When EN is set HIGH the device enters a low-power mode, disabling all protectioncircuits. When used in combined charger and USB‑OTG applications the 30 V tolerantVBUSI switch terminal is used as the supply and switch input when charging, forUSB‑OTG the VBUSO switch terminal is used as the supply and switch input.
Designed for operation from 3.2 V to 6.35 V, it is used in battery charging and powerdomain isolation applications to reduce power dissipation and extend battery life.

特性 Features

• 30 V tolerant VBUSI supply pin
• Wide supply voltage range from 3.2 V to 6.35 V
• Automatic switch operation for charging within the supply range
• ISW maximum 3 A continuous current
• Low ON resistance: 62 mΩ (typical) at a supply voltage of 5.0 V
• 1.8 V control logic input to open the switch
• Soft start turn-on slew rate
• Protection circuitry
• Overtemperature protection
• Overvoltage lockout
• Undervoltage lockout
• ESD protection:
• HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2 kV
• CDM AEC standard Q100-01 (JESD22-C101E)
• IEC61000-4-2 contact discharge exceeds 8 kV for pins VBUSI, D-, D+ and ID
• Specified from -40 °C to +85 °C

应用 Application

智能和功能手机
平板电脑、eBook