Logic controlled high-side power switch

General description The NX5P2090 is an advanced power switch for USB OTG applications. It includes under-voltage and over-voltage lockout, over-current, over-temperature, reverse bias and in-rush current protection circuits. These are designed to automatically isolate a VBUS OTG voltage source

文件：644.42 Kbytes 页数：20 Pages

恩XP

Logic controlled high-side power switch

恩XP

丝印：NX5P2；Package：WLCSP9；Logic controlled high-side power switch

General description The NX5P2090 is an advanced power switch for USB OTG applications. It includes under-voltage and over-voltage lockout, over-current, over-temperature, reverse bias and in-rush current protection circuits. These are designed to automatically isolate a VBUS OTG voltage source

文件：644.42 Kbytes 页数：20 Pages

恩XP

Logic controlled high-side power switch

文件：644.42 Kbytes 页数：20 Pages

PHI

PHI

逻辑控制型高端电源开关

The NX5P2090 is an advanced power switch for USB OTG applications. It includesunder-voltage and over-voltage lockout, over-current, over-temperature, reverse bias andin-rush current protection circuits. These are designed to automatically isolate a VBUSOTG voltage source from a VBUS interface pin wh Wide supply voltage range from 3 V to 5.5 V\n30 V tolerant on VBUS\nISW maximum 2 A continuous current\nVery low ON resistance: 100 mΩ (maximum) at a supply voltage of 4.0 V\nLow-power mode (ground current 20 μA typical)\n1.8 V control logic\nSoft start turn-on slew rate\nProtection circuitry:Over-t;

恩XP