Logic controlled high-side power switch

General description The NX5P1100 is an advanced power switch and ESD-protection device for USB OTG applications. It includes under voltage and over voltage lockout, over-current, over-temperature, reverse bias and in-rush current protection circuits. These circuits are designed to isolate a VB

文件：672.21 Kbytes 页数：20 Pages

恩XP

Logic controlled high-side power switch

恩XP

丝印：NX5PB；Package：WLCSP12；Logic controlled high-side power switch

General description The NX5P1100 is an advanced power switch and ESD-protection device for USB OTG applications. It includes under voltage and over voltage lockout, over-current, over-temperature, reverse bias and in-rush current protection circuits. These circuits are designed to isolate a VB

文件：672.21 Kbytes 页数：20 Pages

恩XP

Logic controlled high-side power switch

文件：672.21 Kbytes 页数：20 Pages

PHI

PHI

逻辑控制的高侧电源开关

The NX5P1100 is an advanced power switch and ESD-protection device for USB OTGapplications. It includes under voltage and over voltage lockout, over-current,over-temperature, reverse bias and in-rush current protection circuits. These circuits aredesigned to isolate a VBUS OTG voltage source from a Wide supply voltage range from 3 V to 5.5 V\n30 V tolerant on VBUS\nISW maximum 1 A continuous current\nVery low ON resistance: 100 mΩ (maximum) at a supply voltage of 4.0 V\nLow-power mode (ground current 20 μA typical)\n1.8 V control logic\nSoft start turn-on slew rate\nProtection circuitryOver-te;

恩XP