NX5DV330D

四路2选1视频多路复用器/解复用器; 两个端口之间的5 Ω开关连接\nTTL兼容输入电平\n通过开关的最小传播延迟\nESD保护： HBM JESD22-A114E 2A类超过2000 V\nMM JESD22-A115-A超过200 V\nCDM JESD22-C101C超过1000 V\n\n已完成闭锁测试，符合超过100 mA的JEDEC标准JESD78\n;

NX5DV330是四路2选1高速TTL兼容视频多路复用器/解复用器。开关的低导通电阻允许输入连接到输出而不增加传播延迟或产生额外的地弹噪声。\n其具有一个数字选择输入(S)、四个独立的输入/输出（nY0和nY1）、一个公共输入/输出(nZ)和一个低电平有效使能输入(E)。针脚E为高电平时，开关关闭。\n选择输入(S)和使能输入(E)处的施密特触发器动作使电路容许整个4.0 V至5.5 V VCC范围内较慢的输入上升和下降时间。\nNX5DV330的特点是工作温度范围为-40 °C至+85 °C。\n

NX5DV330DS

High-speed USB 2.0 switch with enable; 5 Ω switch connection between two ports\nTTL-compatible input levels\nMinimal propagation delay through the switch\nESD protection: HBM JESD22-A114E Class 2A exceeds 2000 V\nMM JESD22-A115-A exceeds 200 V\nCDM JESD22-C101C exceeds 1000 V\nLatch-up testing is done to JEDEC standard JESD78 which exceeds 100 mA\n;

The NX5DV330 is a quad 1-of-2 high-speed TTL-compatible video multiplexer/demultiplexer. The low ON resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise\nIt has a digital select input (S), four independent inputs/outputs (nY0, nY1), a common input/output (nZ) and an active LOW enable input (E). When pin E is HIGH, the switch is turned off.\nSchmitt-trigger action at the enable input (E) and select input (S) makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 4.0 V to 5.5 V.\nThe NX5DV330 is characterized for operation from -40 Cel to +85 Cel.\n

NX5DV330

Quad1-of-2videomultiplexer/demultiplexer