Low-ohmic single-pole single-throw analog switch

文件：171.44 Kbytes 页数：18 Pages

PHI

飞利浦

Low-ohmic single-pole single-throw analog switch

文件：122.24 Kbytes 页数：16 Pages

恩XP

Low-ohmic single-pole single-throw analog switch

文件：443.93 Kbytes 页数：18 Pages

恩XP

Low-ohmic single-pole single-throw analog switch

文件：171.44 Kbytes 页数：18 Pages

PHI

飞利浦

低电阻单刀单掷模拟开关

The NX3V1G384 is a low-ohmic single-pole single-throw analog switch. It has twoinput/output terminals (Y and Z) and an active LOW enable input pin (E). When pin E isHIGH, the analog switch is turned off.\nSchmitt trigger action at the enable input (E) makes the circuit tolerant to slower input risea Wide supply voltage range from 1.4 V to 4.3 V\nVery low ON resistance (peak): 0.8 Ω (typical) at VCC = 1.4 V\n0.5 Ω (typical) at VCC = 1.65 V\n0.3 Ω (typical) at VCC = 2.3 V\n0.25 Ω (typical) at VCC = 2.7 V\n0.25 Ω (typical) at VCC = 4.3 V\nHigh noise immunity\nESD protection: HBM JESD22-A114F Class;

恩XP

恩智浦