Dual low-ohmic single-pole single-throw analog switch

The NX3L2G66 is a dual low-ohmic single-pole single-throw analog switch. Each switchhas two input/output terminals (nY and nZ) and an active HIGH enable input (nE). Whenpin nE is LOW, the analog switch is turned off.\nSchmitt trigger action at the enable input (nE) makes the circuit tolerant to slow Wide supply voltage range from 1.4 V to 4.3 V\nVery low ON resistance (peak): 1.6 Ω (typical) at VCC = 1.4 V\n1.0 Ω (typical) at VCC = 1.65 V\n0.55 Ω (typical) at VCC = 2.3 V\n0.50 Ω (typical) at VCC = 2.7 V\n0.50 Ω (typical) at VCC = 4.3 V\nHigh noise immunity\nESD protection: HBM JESD22-A114F Clas;

恩XP

恩智浦

Dual low-ohmic single-pole single-throw analog switch

文件：154.74 Kbytes 页数：21 Pages

恩XP

NDK
2-SMD

NDK

金属工业

上传：深圳市纳艾斯科技有限公司

NXP
XQFN10

恩XP

上传：深圳市森海汇恒科技有限公司

NEXPERIA
con

NEXPERIANexperia B.V. All rights reserved

安世安世半导体(中国)有限公司

上传：北京天阳诚业科贸有限公司