Dual low-ohmic double-pole double-throw analog switch

文件：235.29 Kbytes 页数：24 Pages

恩XP

Dual low-ohmic double-pole double-throw analog switch

文件：276.94 Kbytes 页数：24 Pages

PHI

飞利浦

Dual low-ohmic double-pole double-throw analog switch

文件：235.29 Kbytes 页数：24 Pages

恩XP

Dual low-ohmic double-pole double-throw analog switch

文件：235.29 Kbytes 页数：24 Pages

恩XP

Dual low-ohmic double-pole double-throw analog switch

文件：235.29 Kbytes 页数：24 Pages

恩XP

Dual low-ohmic double-pole double-throw analog switch

The NX3L2467 is a dual low-ohmic double-pole double-throw analog switch suitable foruse as an analog or digital multiplexer/demultiplexer. It consists of four switches, eachwith two independent input/outputs (nY0 and nY1) and a common input/output (nZ). Thetwo digital inputs (1S and 2S) are used to Wide supply voltage range from 1.4 V to 4.3 V\nVery low ON resistance (peak): 1.7 Ω (typical) at VCC = 1.4 V\n1.0 Ω (typical) at VCC = 1.65 V\n0.6 Ω (typical) at VCC = 2.3 V\n0.5 Ω (typical) at VCC = 2.7 V\n0.5 Ω (typical) at VCC = 4.3 V\nBreak-before-make switching\nHigh noise immunity\nESD protect;

恩XP

Dual low-ohmic double-pole double-throw analog switch

The NX3L2467 is a dual low-ohmic double-pole double-throw analog switch suitable foruse as an analog or digital multiplexer/demultiplexer. It consists of four switches, eachwith two independent input/outputs (nY0 and nY1) and a common input/output (nZ). Thetwo digital inputs (1S and 2S) are used to Wide supply voltage range from 1.4 V to 4.3 V\nVery low ON resistance (peak): 1.7 Ω (typical) at VCC = 1.4 V\n1.0 Ω (typical) at VCC = 1.65 V\n0.6 Ω (typical) at VCC = 2.3 V\n0.5 Ω (typical) at VCC = 2.7 V\n0.5 Ω (typical) at VCC = 4.3 V\nBreak-before-make switching\nHigh noise immunity\nESD protect;

恩XP

Dual low-ohmic double-pole double-throw analog switch

The NX3L2467 is a dual low-ohmic double-pole double-throw analog switch suitable foruse as an analog or digital multiplexer/demultiplexer. It consists of four switches, eachwith two independent input/outputs (nY0 and nY1) and a common input/output (nZ). Thetwo digital inputs (1S and 2S) are used to Wide supply voltage range from 1.4 V to 4.3 V\nVery low ON resistance (peak): 1.7 Ω (typical) at VCC = 1.4 V\n1.0 Ω (typical) at VCC = 1.65 V\n0.6 Ω (typical) at VCC = 2.3 V\n0.5 Ω (typical) at VCC = 2.7 V\n0.5 Ω (typical) at VCC = 4.3 V\nBreak-before-make switching\nHigh noise immunity\nESD protect;

恩XP