NX3L2267

Low-ohmic dual single-pole double-throw analog switch

ETC

NX3L2267GM

Low-ohmic dual single-pole double-throw analog switch; Wide supply voltage range from 1.4 V to 4.3 V\nVery low ON resistance (peak): 1.65 Ω (typical) at VCC = 1.4 V\n0.95 Ω (typical) at VCC = 1.65 V\n0.55 Ω (typical) at VCC = 2.3 V\n0.50 Ω (typical) at VCC = 2.7 V\n0.50 Ω (typical) at VCC = 4.3 V\nBreak-before-make switching\nHigh noise immunity\nESD protection: HBM JESD22-A114F Class 3A exceeds 7500 V\nMM JESD22-A115-A exceeds 200 V\nCDM AEC-Q100-011 revision B exceeds 1000 V\nIEC61000-4-2 contact discharge exceeds 6000 V for switch ports\nCMOS low-power consumption\nLatch-up performance exceeds 100 mA per JESD 78B Class II Level A\n1.8 V control logic at VCC = 3.6 V\nControl input accepts voltages above supply voltage\nVery low supply current, even when input is below VCC\nHigh current handling capability (350 mA continuous current under 3.3 V supply)\nSpecified from -40 °C to +85 °C and from -40 °C to +125 °C\n;

The NX3L2267 is a dual low-ohmic single-pole double-throw analog switch suitable for use as an analog or digital 2:1 multiplexer/demultiplexer. Each switch has a digital select input (nS), two independent inputs/outputs (nY0 and nY1) and a common input/output (nZ).\nSchmitt trigger action at the digital inputs makes the circuit tolerant to slower input rise and fall times. Low threshold digital inputs allows this device to be driven by 1.8 V logic levels in 3.3 V applications without significant increase in supply current ICC. This makes it possible for the NX3L2267 to switch 4.3 V signals with a 1.8 V digital controller, eliminating the need for logic level translation. The NX3L2267 allows signals with amplitude up to VCC to be transmitted from nZ to nY0 or nY1, or from nY0 or nY1 to nZ. Its low ON resistance (0.5 Ω) and flatness (0.13 Ω) ensures minimal attenuation and distortion of transmitted signals.\n

恩XP

NX3L2267GU

Low-ohmic dual single-pole double-throw analog switch; Wide supply voltage range from 1.4 V to 4.3 V\nVery low ON resistance (peak): 1.65 Ω (typical) at VCC = 1.4 V\n0.95 Ω (typical) at VCC = 1.65 V\n0.55 Ω (typical) at VCC = 2.3 V\n0.50 Ω (typical) at VCC = 2.7 V\n0.50 Ω (typical) at VCC = 4.3 V\nBreak-before-make switching\nHigh noise immunity\nESD protection: HBM JESD22-A114F Class 3A exceeds 7500 V\nMM JESD22-A115-A exceeds 200 V\nCDM AEC-Q100-011 revision B exceeds 1000 V\nIEC61000-4-2 contact discharge exceeds 6000 V for switch ports\nCMOS low-power consumption\nLatch-up performance exceeds 100 mA per JESD 78B Class II Level A\n1.8 V control logic at VCC = 3.6 V\nControl input accepts voltages above supply voltage\nVery low supply current, even when input is below VCC\nHigh current handling capability (350 mA continuous current under 3.3 V supply)\nSpecified from -40 °C to +85 °C and from -40 °C to +125 °C\n;

The NX3L2267 is a dual low-ohmic single-pole double-throw analog switch suitable for use as an analog or digital 2:1 multiplexer/demultiplexer. Each switch has a digital select input (nS), two independent inputs/outputs (nY0 and nY1) and a common input/output (nZ).\nSchmitt trigger action at the digital inputs makes the circuit tolerant to slower input rise and fall times. Low threshold digital inputs allows this device to be driven by 1.8 V logic levels in 3.3 V applications without significant increase in supply current ICC. This makes it possible for the NX3L2267 to switch 4.3 V signals with a 1.8 V digital controller, eliminating the need for logic level translation. The NX3L2267 allows signals with amplitude up to VCC to be transmitted from nZ to nY0 or nY1, or from nY0 or nY1 to nZ. Its low ON resistance (0.5 Ω) and flatness (0.13 Ω) ensures minimal attenuation and distortion of transmitted signals.\n

恩XP

NX3L2267SGU

Low-ohmic dual single-pole double-throw analog switch; Wide supply voltage range from 1.4 V to 4.3 V\nVery low ON resistance (peak): 1.65 Ω (typical) at VCC = 1.4 V\n0.95 Ω (typical) at VCC = 1.65 V\n0.55 Ω (typical) at VCC = 2.3 V\n0.50 Ω (typical) at VCC = 2.7 V\n0.50 Ω (typical) at VCC = 4.3 V\nBreak-before-make switching\nHigh noise immunity\nESD protection: HBM JESD22-A114F Class 3A exceeds 7500 V\nMM JESD22-A115-A exceeds 200 V\nCDM AEC-Q100-011 revision B exceeds 1000 V\nIEC61000-4-2 contact discharge exceeds 6000 V for switch ports\nCMOS low-power consumption\nLatch-up performance exceeds 100 mA per JESD 78B Class II Level A\n1.8 V control logic at VCC = 3.6 V\nControl input accepts voltages above supply voltage\nVery low supply current, even when input is below VCC\nHigh current handling capability (350 mA continuous current under 3.3 V supply)\nSpecified from -40 °C to +85 °C and from -40 °C to +125 °C\n;

The NX3L2267 is a dual low-ohmic single-pole double-throw analog switch suitable for use as an analog or digital 2:1 multiplexer/demultiplexer. Each switch has a digital select input (nS), two independent inputs/outputs (nY0 and nY1) and a common input/output (nZ).\nSchmitt trigger action at the digital inputs makes the circuit tolerant to slower input rise and fall times. Low threshold digital inputs allows this device to be driven by 1.8 V logic levels in 3.3 V applications without significant increase in supply current ICC. This makes it possible for the NX3L2267 to switch 4.3 V signals with a 1.8 V digital controller, eliminating the need for logic level translation. The NX3L2267 allows signals with amplitude up to VCC to be transmitted from nZ to nY0 or nY1, or from nY0 or nY1 to nZ. Its low ON resistance (0.5 Ω) and flatness (0.13 Ω) ensures minimal attenuation and distortion of transmitted signals.\n

恩XP

NX3L2267_15

Low-ohmic dual single-pole double-throw analog switch

PHI

NX3L2267GM

Low-ohmic dual single-pole double-throw analog switch

ETC

NX3L2267GU

Low-ohmic dual single-pole double-throw analog switch

ETC

NX3L2267S

Low-ohmic dual single-pole double-throw analog switch

ETC

NX3L2267S_15

Low-ohmic dual single-pole double-throw analog switch

PHI

NX3L2267SGU

Low-ohmic dual single-pole double-throw analog switch

ETC