Low-ohmic single-pole double-throw analog switch

文件：479.75 Kbytes 页数：21 Pages

恩XP

Low-ohmic single-pole double-throw switch

文件：128.49 Kbytes 页数：19 Pages

恩XP

Low-ohmic single-pole double-throw analog switch

文件：479.75 Kbytes 页数：21 Pages

恩XP

Low-ohmic single-pole double-throw analog switch

文件：178.08 Kbytes 页数：21 Pages

PHI

飞利浦

Low-ohmic single-pole double-throw switch

文件：128.49 Kbytes 页数：19 Pages

恩XP

Low-ohmic single-pole double-throw analog switch

文件：479.75 Kbytes 页数：21 Pages

恩XP

Low-ohmic single-pole double-throw analog switch

The NX3L1T5157 is a low–ohmic single–pole double–throw analog switch suitable for use as an analog or digital 2:1 multiplexer/demultiplexer. It has a digital select input (S), two independent inputs/outputs (Y0 and Y1) and a common input/output (Z).\nSchmitt trigger action at the digital input makes Wide supply voltage range from 1.4 V to 4.3 V\nVery low ON resistance (peak): 1.6 Ω (typical) at VCC = 1.4 V\n1.0 Ω (typical) at VCC = 1.65 V\n0.55 Ω (typical) at VCC = 2.3 V\n0.50 Ω (typical) at VCC = 2.7 V\n0.50 Ω (typical) at VCC = 4.3 V\nHigh noise immunity\nESD protection: HBM JESD22– A114F Cla;

恩XP