NX3L1G384GW

Low-ohmic single-pole single-throw analog switch; Wide supply voltage range from 1.4 V to 4.3 V\nVery low ON resistance (peak): 1.6 Ω (typical) at VCC = 1.4 V\n1.0 Ω (typical) at VCC = 1.65 V\n0.55 Ω (typical) at VCC = 2.3 V\n0.50 Ω (typical) at VCC = 2.7 V\n0.50 Ω (typical) at VCC = 4.3 V\nHigh noise immunity\nESD protection: HBM JESD22-A114F Class 3A exceeds 7500 V\nMM JESD22-A115-A exceeds 200 V\nCDM AEC-Q100-011 revision B exceeds 1000 V\nIEC61000-4-2 contact discharge exceeds 4000 V for switch ports\nCMOS low-power consumption\nLatch-up performance exceeds 100 mA per JESD 78 Class II Level A\nDirect interface with TTL levels at 3.0 V\nControl input accepts voltages above supply voltage\nHigh current handling capability (350 mA continuous current under 3.3 V supply)\nSpecified from -40 °C to +85 °C and from -40 °C to +125 °C\n;

The NX3L1G384 is a low-ohmic single-pole single-throw analog switch. It has twoinput/output terminals (Y and Z) and an active LOW enable input pin (E). When E is HIGH,the analog switch is turned off.\nSchmitt trigger action at the enable input (E) makes the circuit tolerant to slower input riseand fall times. The NX3L1G384 allows signals with amplitude up to VCC to be transmittedfrom Y to Z; or from Z to Y. Its low ON resistance (0.5 Ω) and flatness (0.13 Ω) ensuresminimal attenuation and distortion of transmitted signals.\n

NX3L1G384_15

Low-ohmic single-pole single-throw analog switch