Dual high-speed USB 2.0 double-pole double-throw analog

文件：792.29 Kbytes 页数：16 Pages

恩XP

High Speed USB 2.0 (480Mbps) DPDT Analog Switch

Features | « Low On-resistance, Ron=1.50 when VCC =5V | « 1.8V Logic Compatible Control Pin «High OffIsolation: -100dB @ 100KHz | « COM+/- Overrides VCC to Achieve True Isolation Even When Supply Is Dead o Low Channel-to-Channel Crosstalk: -97dB @ 100KHz » High Bandwidth (-3dB @550MHz) Sui

文件：3.54843 Mbytes 页数：7 Pages

TECHPUBLIC

台舟电子

Dual high-speed USB 2.0 double-pole double-throw analog switch

The NX3DV42 is a double-pole double-throw analog switch suitable for use as an analogor digital multiplexer/demultiplexer. Its wide bandwidth and low bit-to-bit skew allows theNX3DV42 to pass high-speed differential signals with good signal integrity. Its highchannel to channel crosstalk rejection r • Supply voltage range from 3.0 V to 4.3 V\n• 4 Ω typical ON resistance\n• 7.3 pF typical ON capacitance\n• 950 MHz typical bandwidth or data frequency\n• Low crosstalk of -30 dB at 240 MHz\n• Break-before-make switching\n• ESD protection:• HBM JESD22-A114F Class 3A exceeds 4000 V\n• CDM AEC-Q100-01;

恩XP

Dual high-speed USB 2.0 double-pole double-throw analog switch

The NX3DV42 is a double-pole double-throw analog switch suitable for use as an analogor digital multiplexer/demultiplexer. Its wide bandwidth and low bit-to-bit skew allows theNX3DV42 to pass high-speed differential signals with good signal integrity. Its highchannel to channel crosstalk rejection r • Supply voltage range from 3.0 V to 4.3 V\n• 4 Ω typical ON resistance\n• 7.3 pF typical ON capacitance\n• 950 MHz typical bandwidth or data frequency\n• Low crosstalk of -30 dB at 240 MHz\n• Break-before-make switching\n• ESD protection:• HBM JESD22-A114F Class 3A exceeds 4000 V\n• CDM AEC-Q100-01;

恩XP