Low-ohmic four-pole double-throw analog switch

Features » ultra-low On Resistance: 1.8 Q Supply voltage: 1.5V~5.5V o -3dB Bandwidth: 700MHz o Rail-to-Rail Signal Range » Break-Before-Make Switching « Low quiescent current over an Expanded Control Input Range

文件：2.92337 Mbytes 页数：6 Pages

TECHPUBLIC

台舟电子

Low-ohmic four-pole double-throw analog switch

General description The NX3DV2567-Q100 is a four-pole double-throw analog switch (4PDT) optimized for switching WLAN-SIM supply, data and control signals. It has one digital select input (S) and four switches each with two independent input/outputs (nY0 and nY1) and a common input/output (nZ).

文件：169.7 Kbytes 页数：19 Pages

恩XP

Low-ohmic four-pole double-throw analog switch

1 General description The NX3DV2567-Q100 is a four-pole double-throw analog switch (4PDT) optimized for switching WLAN-SIM supply, data and control signals. It has one digital select input (S) and four switches each with two independent input/outputs (nY0 and nY1) and a common input/output (nZ).

文件：333.95 Kbytes 页数：21 Pages

恩XP

Low-ohmic four-pole double-throw analog switch

1 General description The NX3DV2567-Q100 is a four-pole double-throw analog switch (4PDT) optimized for switching WLAN-SIM supply, data and control signals. It has one digital select input (S) and four switches each with two independent input/outputs (nY0 and nY1) and a common input/output (nZ).

文件：333.95 Kbytes 页数：21 Pages

恩XP

Low-ohmic four-pole double-throw analog switch

文件：171.15 Kbytes 页数：20 Pages

PHI

PHI

Low-ohmic four-pole double-throw analog switch

The NX3DV2567 is a four-pole double-throw analog switch (4PDT) optimized for switching WLAN-SIM supply, data and control signals. It has one digital select input (S) and four switches each with two independent input/outputs (nY0 and nY1) and a common input/output (nZ). Schmitt trigger action at S ma • Wide supply voltage range from 1.4 V to 4.3 V\n• Very low ON resistance for supply path: • 0.5Ω(typical) at VCC = 1.8 V\n• 0.45Ω(typical) at VCC = 2.7 V\n• Low ON resistance for data path: • 7Ω(typical) at VCC = 1.8 V\n• 6Ω(typical) at VCC = 2.7 V\n• Low ON capacitance for data path\n• Wide -3 db ;

恩XP

Low-ohmic four-pole double-throw analog switch

The NX3DV2567 is a four-pole double-throw analog switch (4PDT) optimized for switching WLAN-SIM supply, data and control signals. It has one digital select input (S) and four switches each with two independent input/outputs (nY0 and nY1) and a common input/output (nZ). Schmitt trigger action at S ma • Wide supply voltage range from 1.4 V to 4.3 V\n• Very low ON resistance for supply path: • 0.5Ω(typical) at VCC = 1.8 V\n• 0.45Ω(typical) at VCC = 2.7 V\n• Low ON resistance for data path: • 7Ω(typical) at VCC = 1.8 V\n• 6Ω(typical) at VCC = 2.7 V\n• Low ON capacitance for data path\n• Wide -3 db ;

恩XP

Low-ohmic four-pole double-throw analog switch

The NX3DV2567 is a four-pole double-throw analog switch (4PDT) optimized for switching WLAN-SIM supply, data and control signals. It has one digital select input (S) and four switches each with two independent input/outputs (nY0 and nY1) and a common input/output (nZ). Schmitt trigger action at S ma • Wide supply voltage range from 1.4 V to 4.3 V\n• Very low ON resistance for supply path: • 0.5Ω(typical) at VCC = 1.8 V\n• 0.45Ω(typical) at VCC = 2.7 V\n• Low ON resistance for data path: • 7Ω(typical) at VCC = 1.8 V\n• 6Ω(typical) at VCC = 2.7 V\n• Low ON capacitance for data path\n• Wide -3 db ;

恩XP