NX3DV221TK数据手册恩XP中文资料规格书

描述 Description

The NX3DV221 is a high-bandwidth switch designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide bandwidth (1 GHz) of this switch allows signal to pass with minimum edge and phase distortion. The device multiplexes differential outputs from a USB host device to one of two corresponding outputs. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It is designed for low bit-to-bit skew and high channel-to-channel noise isolation, and is compatible with various standards, such as high-speed USB 2.0 (480 Mbps).

特性 Features

Wide supply voltage range from 2.3 V to 3.6 V
Switch voltage accepts signals up to 5.5 V
1.8 V control logic at VCC = 3.6 V
Low-power mode when OE is HIGH (2 µA maximum)
6 Ω (maximum) ON resistance
0.1 Ω (typical) ON resistance mismatch between channels
6 pF (typical) ON-state capacitance
High bandwidth (1.0 GHz typical)
Latch-up performance exceeds 100 mA per JESD 78B Class II Level A
ESD protection: HBM JESD22-A114F Class 3A exceeds 8000 V
CDM JESD22-C101E exceeds 1000 V
HBM exceeds 12000 V for I/O to GND protection
Specified from -40 °C to +85 °C
Target ApplicationsRoutes signals for USB 1.0, 1.1 and 2.0

应用 Application

Routes signals for USB 1.0, 1.1 and 2.0