NX20P5090UK中文资料High Voltage USB PD Power Switch数据手册恩XP规格书

描述 Description

The NX20P5090 is an advanced 5.0 A Uni-directional power switch for USB PD. It includes undervoltage lockout, over voltage lockout, reverse current protection and over-temperatureprotection circuits, it is designed to automatically isolate the power switch terminalswhen a fault condition occurs. Both VBUS and VINT pin have 29 V tolerance in shutdownmode, two NX20P5090s can be used in parallel to support dual power inputs connecting tosame charging circuit.
The device has a default 23 V over voltage protection threshold, and the OVP thresholdcan be adjusted by using external resistors on OVLO pin. A 15 ms debounce time isdeployed every time before the device is switched ON, followed by a soft start to limitthe inrush current.
Designed for operation from 2.5 V to 20.0 V, it is used in USB PD power domain isolationapplications to offer essential protection and enhance reliability.
NX20P5090 is offered in a small 15 bumps 1.6 × 2.6 mm, 0.5 mm pitch WLCSP package.

特性 Features

All time two level reverse-current protection
29 V tolerance on both VBUS and VINT pin
Wide supply voltage range from 2.5 V to 20.0 V
ISW maximum 5 A continuous current
30 mΩ (typical) Low ON resistance
Default 23 V OVLO threshold and adjustable by external resistor
Built in Slew rate control for inrush current limit
Active Low EN pin with built-in pull down resistor
Open-drain ACK pin for power good indication
Protection circuitry:Over-Temperature Protection
Over-Voltage Lockout
Under-voltage Lockout
Reverse Current Protection

Surge protection: IEC61000-4-5 exceeds ±80 V on VBUS
ESD protection:IEC61000-4-2 contact discharge exceeds 8 kV on VBUS
HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2 kV
CDM AEC standard Q100-01 (JESD22-C101E)

Specified from -40 °C to +85 °C

应用 Application

Smart and feature phones
Tablets, eBooks