General description

The device is an SD 3.0-compliant bidirectional dual voltage level translator with autodirection

control. It is designed to interface between a memory or SIM card operating

between 1.62 V to 3.6 V signal levels and a host with a supply voltage of 1.08 V to

1.98 V. The device supports SD 3.0 SDR104, SDR50, DDR50, SDR25, SDR12 and SD 2.0 High-

Speed (50 MHz) and Default-Speed (25 MHz) modes. The device has an auto-enable/

disable function connected to the VCCB supply pin, built-in EMI filters and robust ESD

protections (IEC 61000-4-2, level 4) on VCCB or any of the card side pins. External ESD

diodes are not required. This device also supports SIM card voltage level translator using CLK and two of the data lines for SD and SIM card combo sockets.

Features and benefits

• Supports up to 208 MHz clock rate

• SD 3.0 specification-compliant voltage translation to support SDR104, SDR50, DDR50,

SDR25, SDR12, High-Speed and Default-Speed modes

• Compliant with all ETSI, IMT-2000 and ISO-7816 SIM/Smart Card interface

requirements

• Support SD/SIM card supply voltages with range of 1.62 V to 3.6 V

• Host microcontroller operating voltage range: 1.08 V to 1.98 V

• Feedback channel for clock synchronization

• Low power consumption by push-pull output stage with break-before-make architecture

• Automatic enable and disable through VCCB

• Integrated pull-up and pull-down resistors

• Integrated EMI filters suppress higher harmonics of digital I/Os

• Integrated 8 kV ESD protection according to IEC 61000-4-2, level 4 on on VCCB or any

of the card side pins

• Level shifting buffers keep ESD stress away from the host (zero-clamping concept)

• Available in XQFN16 with 0.4 mm pitch and WLCSP16 with 0.35 mm pitch

Applications

• Smart phones

• Mobile handsets

• Digital cameras

• Tablet PCs

• Laptop computers

• SD, MMC or microSD card readers

NVT4858HKZ属于集成电路（IC） > 转换器，电平移位器。恩智浦半导体公司制造生产的NVT4858HKZ转换器，电平移位器逻辑转换器或电平移位器 IC 可用于在数字逻辑设备之间传递信息，这些设备可在不同/不兼容的供电电压下工作，或可实现不同的信令方式。例如，可以将需要 5 V 电源的数字输出传感器连接到具有 3.3 V I/O 电源的 FPGA，或者在 CMOS 或 TTL 等单端信令方式与 PECL 或 LVDS 等差分技术之间进行转换。