NTCALUG85A103GLA传感器变送器的温度传感器-NTC热敏电阻器规格书PDF中文资料

FEATURES

• Easy mounting using ring tongue terminal

• Rugged construction

• Cable of PTFE insulation according to

NEMA HP-3, type E, rated 600 VRMS (1)

• AEC-Q200 qualified (grade 1)

• cULus recognized, file E148885

(UL category XGPU2/XGPU8)

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

Note

(1) Formerly MIL-W-16878/4, type E, cable test voltage 3.4 kV

APPLICATIONS

Suitable for surface sensing applications, especially when a

good electrical insulation and a good thermal contact with

the chassis is required.

DESCRIPTION

A NTC thermistor chip is soldered to AWG#24 stranded

silver plated copper leads with PTFE insulation and

insulated with epoxy coating. The insulated sensor is

attached to a tin plated copper ring lug. The lead wires are

stripped.

PACKAGING

The thermistors are packed in cardboard boxes.

CAUTIONS AND WARNINGS ON MOUNTING

AND HANDLING

Please read the special instructions:

see www.vishay.com/doc?29221

• By means of M6 (stud #1/4) screw. Leads to be soldered

or crimped

• The device is suitable for screwing e.g. on metal surface

• The leads are suitable for soldering e.g. on PCB

DESIGN-IN SUPPORT

• Other resistance curves and tolerances are available on

request

• Consult Vishay for other lead length, other connector

crimping, or other features

https://info.vishay.com/vishay-ntc-modification-request

• 3D solid models: www.vishay.com/doc?29200

• NTC curve computation:

www.vishay.com/thermistors/ntc-rt-calculator/