NLSX0102数据手册集成电路（IC）的转换器电平移位器规格书PDF

描述 Description

The NLSX0102 is a 2-bit configurable dual-supply bidirectional auto sensing translator that does not require a directional control pin. The IO VCC and IO VL ports are designed to track two different power supply rails, VCC and VL respectively. Both the VCC and VL supply rails are configurable from 1.5V to 5.5V. This allows voltage logic signals on the VL side to be translated into lower, higher or equal value voltage loigc signals on the VCC side, and vice-versa. The NLSX0102 translator has integrated 10k ohms pull-up resistors on the IO lines. The integrated resistors are used to pull-up the IO lines to either VL or VCC. The NLSX0102 is an excellent match for open-drain applications such as the I2C communication bus.

特性 Features

• VL can be Less than, Greater than or Equal to VCC
• Wide VCC Operating Range: 1.5 V to 5.5 V
• Wide VL Operating Range: 1.5 V to 5.5 V
• High Speed with 24 Mb/s Guaranteed Date Rate
• Low Bit to Bit Skew
• Enable Input and I/O Pins are Overvoltage Tolerant (OVT) to 5.5 V
• Non preferential Power up Sequencing
• Integrated 10 k ohm Pull up Resistors
• Small Space Saving Package:1.9 mm x 0.9 mm x 0.5 mm Flipchip8
• This is a Pb Free Device
• Low Voltage ASIC Level Translation
• ESD Protection for All Pins: Human Body Model (HBM) > 7000 V

应用 Application

• I2C, SMBus
• Mobile Phones, PDAs, Cameras

简介

NLSX0102属于集成电路（IC）的转换器电平移位器。由制造生产的NLSX0102转换器，电平移位器逻辑转换器或电平移位器 IC 可用于在数字逻辑设备之间传递信息，这些设备可在不同/不兼容的供电电压下工作，或可实现不同的信令方式。例如，可以将需要 5 V 电源的数字输出传感器连接到具有 3.3 V I/O 电源的 FPGA，或者在 CMOS 或 TTL 等单端信令方式与 PECL 或 LVDS 等差分技术之间进行转换。