NLAS4051中文资料模拟多工器/信号分离器数据手册ONSEMI规格书

描述 Description

The NLAS4051 is an improved version of the MC14051 and MC74HC4051 fabricated in sub-micron Silicon Gate CMOS technology for lower RDS(on) resistance and improved linearity with low current. This device may be operated either with a single supply ordual supply up to +/-3 V to pass a 6 VPP signal without couplingcapacitors.When operating in single supply mode, it is only necessary to tie VEE, pin 7 to ground. For dual supply operation, VEE is tied to a negative voltage, not to exceed maximum ratings.

特性 Features

• Improved RDS(on) Specifications
• Pin for Pin Replacement for MAX4051 and MAX4051A- One Half the Resistance Operating at 5.0 Volts
• Single or Dual Supply Operation- Single 2.5-5 Volt Operation, or Dual +/-3 Volt Operation- With VCC of 3.0 to 3.3 V, Device Can Interface with 1.8 V Logic, No Translators Needed- Address and Inhibit Logic are Over-Voltage Tolerant and May Be Driven Up +6 V Regardless of VCC.
• Improved Linearity Over Standard HC4051 Devices
• Popular SOIC, and Space Saving TSSOP, and QSOP 16 Pin Packages
• Pb-Free Packages are Available