NJG1519KC1数据手册RF/IF射频/中频RFID的射频开关规格书PDF

描述 Description

GENERAL DESCRIPTION
NJG1519KC1 is a GaAs high power SP4T switch MMIC for antenna switch of dual mode cellular phone application such as GSM/DCS1800.
This switch is designed for an antenna switch between an antenna and one of two Tx ports or two Rx ports to control RF signals up to 2.5GHz.
The ultra small & ultra thin FLP10 package is applied.FEATURES
● Low voltage operation     +2.5V min
● Pin at 0.2dB compression point  36dBm typ. @f=1.9GHz, VCTL=3V
● Low insertion loss 0.55dB typ. @f=0.9GHz, PIN=34dBm, VCTL=3V
                                 0.80dB typ. @f=1.9GHz, PIN=32dBm, VCTL=3V
● High isolation 24dB typ. @f=0.9GHz, VCTL=3V
                          18dB typ. @f=1.9GHz, VCTL=3V
● Low control current   30uA typ. @f=0.9GHz, PIN=34dBm, VCTL=3V
● Ultra small & ultra thin package    FLP10-C1 (Mount Size: 2.8x3.0x0.75mm)

特性 Features

● Low voltage operation     +2.5V min
● Pin at 0.2dB compression point  36dBm typ. @f=1.9GHz, VCTL=3V
● Low insertion loss 0.55dB typ. @f=0.9GHz, PIN=34dBm, VCTL=3V
                                 0.80dB typ. @f=1.9GHz, PIN=32dBm, VCTL=3V
● High isolation 24dB typ. @f=0.9GHz, VCTL=3V
                          18dB typ. @f=1.9GHz, VCTL=3V
● Low control current   30uA typ. @f=0.9GHz, PIN=34dBm, VCTL=3V
● Ultra small & ultra thin package    FLP10-C1 (Mount Size: 2.8x3.0x0.75mm)

简介

NJG1519KC1属于RF/IF射频/中频RFID的射频开关。由制造生产的NJG1519KC1射频开关射频开关产品是用于在多个可用信号路径之间路由 RF、IF 或微波信号的器件。示例应用包括多天线（分集）接收器中的天线选择、多模式系统中发射-接收路径的选择，或在发射和接收信号链之间切换天线。