System reset with built-in Watchdog timer

GENERAL DESCRIPTION The NE56604-42 is designed to generate a reset signal at a threshold voltage of 4.2 V for a variety of microprocessor and logic systems. Accurate reset signals are generated during momentary power interruptions, or whenever power supply voltages sag to intolerable levels. The

文件：174.24 Kbytes 页数：17 Pages

PHI

PHI

System reset with built-in Watchdog timer

GENERAL DESCRIPTION\nThe NE56604-42 is designed to generate a reset signal at a threshold voltage of 4.2 V for a variety of microprocessor and logic systems. Accurate reset signals are generated during momentary power interruptions, or whenever power supply voltages sag to intolerable levels. The NE • Both positive and negative logic reset output signals are available\n• Accurate threshold detection\n• Internal power-on reset delay\n• Internal Watchdog timer programmable with external resistor\n• Watchdog monitoring time of 100 ms (typical)\n• Reset assertion with VCC down to 0.8 VDC (typical)\;

恩XP

System reset with built-in Watchdog timer

GENERAL DESCRIPTION The NE56604-42 is designed to generate a reset signal at a threshold voltage of 4.2 V for a variety of microprocessor and logic systems. Accurate reset signals are generated during momentary power interruptions, or whenever power supply voltages sag to intolerable levels. The

文件：174.24 Kbytes 页数：17 Pages

PHI

PHI

DIP-16

PHI

PHI

上传：深圳市勤思达科技有限公司

GPS

U-BLOX

上传：深圳市盛泰捷科电子有限公司