Function generator

DESCRIPTION The NE/SE566 Function Generator is a voltage-controlled oscillator of exceptional linearity with buffered square wave and triangle wave outputs. The frequency of oscillation is determined by an external resistor and capacitor and the voltage applied to the control terminal. The oscill

文件：50.15 Kbytes 页数：5 Pages

PHI

PHI

Function generator

DESCRIPTION The NE/SE566 Function Generator is a voltage-controlled oscillator of exceptional linearity with buffered square wave and triangle wave outputs. The frequency of oscillation is determined by an external resistor and capacitor and the voltage applied to the control terminal. The oscill

文件：50.15 Kbytes 页数：5 Pages

PHI

PHI

System reset with built-in watchdog timer

GENERAL DESCRIPTION\nThe NE56605-42 is designed to generate a reset signal, at a threshold voltage of 4.2 V, for a variety of microprocessor and logic systems. Accurate reset signals are generated during momentary power interruptions, or whenever power supply voltages sag to intolerable levels. The • Both positive and negative logic reset output signals are available\n• Accurate threshold detection\n• Internal power-on reset delay\n• Internal watchdog timer programmable with external capacitor\n• Watchdog monitoring time of 10 ms\n• Reset assertion with VCC down to 0.8 VDC (typical)\n• Few ext;

恩XP

System reset

GENERAL DESCRIPTION\nThe NE56610/11/12-XX series is a family of devices designed to generate a reset signal for a variety of microprocessor and logic systems. Accurate reset signals are generated during momentary power interruptions or when ever power supply voltages sag to intolerable levels. The N • 12 VDC maximum operating voltage\n• Low operating voltage (0.65 V)\n• Manual Reset input\n• 5-lead small outline surface mount package\n• Offered in reset thresholds of 2.5, 2.7, 2.9, 3.9, 4.2, 4.5 VDC\n• Internal reset delay timer\n   – NE56610 (50 ms typical)\n   – NE56611 (100 ms typical)\n   –;

恩XP