Temperature and voltage monitor

GENERAL DESCRIPTION The NE1619 is designed for monitoring the temperatures and supply voltages of microprocessor-based systems by measuring those parameters and comparing the readings with programmable limits. The device provides five possible analog inputs, a remote temperature sensor input an

文件：167.42 Kbytes 页数：2 Pages

PHI

飞利浦

Precise thermal monitoring with small, accurate temp sensors

文件：258.19 Kbytes 页数：2 Pages

PHI

飞利浦

Smart, simple solutions for the 12 most common design concerns

文件：727.81 Kbytes 页数：8 Pages

恩XP

HECETA4 Temperature and voltage monitor

GENERAL DESCRIPTION\nThe NE1619 is designed for monitoring the temperatures and supply voltages of microprocessor-based systems by measuring those parameters and comparing the readings with programmable limits. The device provides five possible analog inputs, a remote temperature sensor input and on • Monitor local and remote temperatures\n• Temperature accuracy of ±2 °C for local, and ±3 °C for remote channel\n• Temperature resolution of 1 °C\n• 2.8 V to 5.5 V supply range\n• Monitor different power supplies: 12 V, 5 V, 3.3 V, 2.5 V, VCCP, VDD\n• VIN accuracy of ±2% of full scale\n• Differ;

恩XP

Temperature and voltage monitor

GENERAL DESCRIPTION The NE1619 is designed for monitoring the temperatures and supply voltages of microprocessor-based systems by measuring those parameters and comparing the readings with programmable limits. The device provides five possible analog inputs, a remote temperature sensor input an

文件：167.42 Kbytes 页数：2 Pages

PHI

飞利浦

HECETA4温度和电压监控器

NE1619设计用于监控基于微处理器系统的温度和电源电压；可测量这些参数，并将读数与可编程限值进行比较。该器件提供5路潜在模拟输入、一路远程温度传感器输入，并集成片内本地温度传感器。该器件还可监控其自身的电源，并为Pentium/PRO电源ID码提供数字输入。\n该器件通过SMBus（系统管理总线）与系统控制器进行通信；还可通过该总线进行编程以设置工作模式并进行数据采集。这些读数来自片内A-D转换器的转换结果，并在开始转换后大约1秒时间内，按顺序循环所有测量过程。该器件集成一系列寄存器，可存储器件的配置、状态、读数和限值等数据信息。除了温度相关数据采用8位数字二进制补码格式外，所有数据均采用8 监控本地和远程温度\n温度精度：+-2 ℃（本地通道）；+-3 ℃（远程通道）\n温度分辨率：1 ℃\n电源电压范围：2.8 V至5.5 V\n监控不同电源电压：12 V、5 V、3.3 V、2.5 V、VCCP、VDD\nVIN精度：+-2 %（满量程）\n差分非线性：+-1 LSB\n无需校准\n可编程温度和电压限值以用于警报\n可编程复位低电平状态脉冲输出\nSMBus双线式串行接口\n16针脚小型SSOP (QSOP)封装\n兼容Intel “Heceta 4”规格，并用于参考设计中\nESD保护优于JESD22-A114标准的2000 V HBM、JESD22-A115标准的;

恩XP