NCV97310A中文资料Multi-output Power Management Unit (PMU) with 3 Buck Regulators数据手册ONSEMI规格书

描述 Description

The NCV97310 is 3−output regulator consisting of a low−Iq battery−connected 3 A 2 MHz non−synchronous switcher and two low−voltage 1.5 A 2 MHz synchronous switchers; all using integrated power transistors.
The high−voltage switcher is capable of converting a 4.1 V to 18 V battery input to a 5 V or 3.3 V output at a constant 2 MHz switching frequency, delivering up to 3 A. In overvoltage conditions up to 36 V, the switching frequency folds back to 1 MHz; in load dump conditions up to 45 V the regulator shuts down.
The output of the battery−connected buck regulator serves as the low voltage input for the 2 synchronous switchers. Each downstream output is adjustable from 1.2 V to 3.3 V, with a 1.5 A current limit and a constant 2 MHz switching frequency. Each switcher has independent enable and reset pins, giving extra power management flexibility.
For low−Iq operating mode the low−voltage switchers are disabled, and the standby rail is supplied by a low−Iq LDO (up to 150 mA) with a typical Iq of 30 uA. The LDO regulator is in parallel to the high−voltage switcher, and is activated when the switcher is forced in standby mode.
All 3 SMPS outputs use peak current mode control with internal slope compensation, internally−set soft−start, battery undervoltage lockout, battery overvoltage protection, cycle−by−cycle current limiting, hiccup mode short−circuit protection and thermal shutdown. An error flag is available for diagnostics.

特性 Features

• Hiccup Overcurrent Protections
• Reduce power during short-circuit events
• Individual Reset Pins with Adjustable Delays
• Voltage Monitoring
• Programmable Spread Spectrum
• EMI Reduction
• QFN Package with Wettable Flanks (Pin Edge Plating)
• Aids in visual inspection of solder joints
• 5.0 V and 3.3 V Primary Output Versions Available
• Low Quiescent Current in Standby Mode
• 2 Microcontroller-enabled Low Voltage Synchronous Buck Converters
• Large Conversion Ratio of 18 V to 3.3 V for Battery-Connected Switcher
• Wide Battery Input of 4.1 V to 45 V with Undervoltage Lockout (UVLO)
• Fixed Frequency Operation Adjustable from 2.0 MHz to 2.6 MHz
• Internal 1.5 ms Soft-Start for All 3 Switchers
• Cycle-by-cycle Peak Current Limit Protections
• These Devices are Pb-Free, Halogen-Free/BFR-Free and are RoHS Compliant
• Battery Overvoltage Protection
• Standby Rail Supplied by a Low-Iq LDO

应用 Application

• Infotainment
• Body Electronics
• Telematics
• ECU
• Automotive