NCV4279C中文资料Linear Voltage Regulator, LDO, 150 mA, with Delay, Adjustable Reset and Sense Output数据手册ONSEMI规格书

描述 Description

The NCV4279C is a 5.0 V precision micropower voltage regulator with an output current capability of 150 mA. The output voltage is accurate within ±2.0% with a maximum dropout voltage of 0.5 V at 100 mA. Low quiescent current is a feature drawing only 125 µA with a 1.0 mA load. This part is ideal for any and all battery operated microprocessor equipment. Microprocessor control logic includes an active reset output RO with delay and a SI/SO monitor which can be used to provide an early warning signal to the microprocessor of a potential impending reset signal. The use of the SI/SO monitor allows the microprocessor to finish any signal processing before the reset shuts the microprocessor down. The active Reset circuit operates correctly at an output voltage as low as 1.0 V. The Reset function is activated during the power up sequence or during normal operation if the output voltage drops outside the regulation limits. The reset threshold voltage can be decreased by the connection of an external resistor divider to the RADJ lead. The regulator is protected against reverse battery, short circuit, and thermal overload conditions. The device can withstand load dump transients making it suitable for use in automotive environments. The device has also been optimized for EMC conditions. If the application requires pullup resistors at the logic outputs Reset and Sense Out, the NCV4269C with integrated resistors can be used.

特性 Features

• 5.0 V ±2.0% Output with 150 mA output current capability
• Tight regulation limits
• Active Reset Output Low Down to VQ=1.0V; Adjustable Reset Threshold
• Microprocessor power management feature, design flexibility
• Fault Protection:-40V Reverse Voltage ProtectionShort Circuit ProtectionThermal overload protection
• No external components required to enable protections required within any automotive applications.
• Early Warning through SI/SO Leads, adjustable threshold via external resistor
• Microprocessor power management feature: warns microprocessor of impending reset event or can also be used as a general purpose comparator.
• AEC Q100 Qualified
• Meets automotive quality requirements
• Very Low Dropout Voltage

应用 Application

• Body and Chassis
• Powertrain
• Infotainment
• Automotive

简介

NCV4279C属于集成电路（IC）的线性+开关稳压器。由制造生产的NCV4279C稳压器 - 线性线性稳压器用于提供稳定的输出电压，无论负载电流、输入电压或环境因素如何变化，这些输出电压通常都要保持不变。它们的工作原理要求输入电压维持在高于所需的输出电压，而且要超出某个最小量，并且在工作时会将输入端的任何多余电压转换为热量。对于大多数应用而言，虽然这种稳压器的效率低于开关模式的稳压器，但它们通常更适合对噪声高度敏感的应用。