NCT214中文资料±1°C 温度监控器，有串联电阻抑制和可寻址能力数据手册ONSEMI规格书

描述 Description

The NCT214 is a dual-channel digital thermometer and undertemperature/overtemperature alarm, intended for use in PCs and thermal management systems. It is register-compativle with the ADM1032 and ADT7461. A feature of the NCT214 is series resistance cancellation, where up to 1.5kΩ (typical) of resistance in series with the temperature monitoring diode can be automatically cancelled from the temperature result, allowing noise filtering. The NCT214 has a configurable /ALERT output and an extended, switchable temperature measurement range. The NCT214 can measure the temperature of a remote thermal diode accurate to ±1°C and the ambient temperature accurate to ±3°C. The temperature measurement range defaults to 0°C to +127°C, compatible with the ADM1032, but it can be switched to a wider measurement range of -64°C to +191°C. The NCT214 communicates over a 2-wire serial interface, compatible with system management bus (SMBus/I2C) standards. The NCT214 has two address pins which allow up to 9 NCT214s to be used on the same bus. An /ALERT output signals when the on-chip or remote temperature is out of range. The /THERM output is a comparator output that allows on/off control of a cooling fan. The /ALERT output can be reconfigured as a second /THERM output, if required.

特性 Features

• On-Chip and Remote Temperature Sensor
• ±.25°C Resolution/1°C Accuracy on Remote Channel
• 1°C Resolution/1°C Accuracy on Local Channel
• Series Resistance Cancellation Up to 1.5kΩ
• Extended, Switchable Temperature Measurement Range 0°C to +127°C (Default) or -64°C to +191°C
• Register-Compatible with ADM1032 and ADT7461
• 2-Wire SMBus/I2C Serial Interface with SMBus Alert Support
• Programmable Over/Undertemperature Limits
• Offset Registers for System Calibration
• Up to Two Overtemperature Fail-Safe /THERM Outputs
• 240 µA Operating Current, 5 µA Standby Current

应用 Application

• Thermal Management
• Desktop Computers
• Servers

简介

NCT214属于传感器变送器的温度传感器-模拟数字输出。由制造生产的NCT214温度传感器 - 模拟和数字输出模拟和数字输出温度传感器可用于测量环境热能量。特征包括传感器类型、本地感测温度、远程感测温度、输出类型、电源电压和分辨率。传感器类型为模拟本地/远程/红外、模拟数字、本地/远程、数字本地/远程/红外或内部，感应温度范围为 -55°C 至 200°C。