5S Battery Protector with State of Charge Indication

The NCS35011 is an ultra−low power protection integrated circuit managing lithium−ion batteries from 3 to 5 cells in series with accurate battery voltage indication up to 5 LED outputs. Each cell in the battery pack is monitored for an over−voltage and under−voltage condition. Upon detecting a

文件：233.4 Kbytes 页数：11 Pages

ONSEMI

安森美半导体

An ultra−low power protection integrated circuit managing lithium−ion batteries from 3 to 5 cells in series with accurate battery voltage indication up to 5 LED outputs.

Each cell in the battery pack is monitored for an over−voltage and under−voltage condition. Upon detecting an over−voltage, the ODI pin will assert indicating a fault condition and stay asserted until the fault is cleared. During an under voltage condition, the UDI pin will also assert indicating th • Over−Voltage (OV) and Under−Voltage (UV) Detection\n• Protection for 3, 4 and 5 Series Cells\n• State of Charge (SoC) Indication with High Voltage Tolerant LED Drivers\n• Configurable Fault Outputs (Active High or Low for Push−Pull or Open Drain)\n• High−Accuracy Voltage Measurement ±5 mV\n• Low P;

ONSEMI

安森美半导体

5S Battery Protector with State of Charge Indication

The NCS35011 is an ultra−low power protection integrated circuit managing lithium−ion batteries from 3 to 5 cells in series with accurate battery voltage indication up to 5 LED outputs. Each cell in the battery pack is monitored for an over−voltage and under−voltage condition. Upon detecting a

文件：233.4 Kbytes 页数：11 Pages

ONSEMI

安森美半导体

Mini Audio Transformers

文件：25.03 Kbytes 页数：1 Pages

RHOMBUS-IND