NCP1615中文资料功率因数控制器，高电压，有源 X2数据手册ONSEMI规格书

描述 Description

The NCP1615 is a high voltage PFC controller designed to drive PFC boost stages based on an innovative Current Controlled Frequency Foldback (CCFF) method. In this mode, the circuit classically operates in critical conduction mode (CrM) when the inductor current exceeds a programmable value. When the current is below this preset level, the NCP1615 linearly decays the frequency down to a minimum of about 26 kHz when the input current is zero. CCFF maximizes the efficiency at both nominal and light load. In particular, the standby losses are reduced to a minimum. An innovative circuitry allows near-unity power factor even when the switching frequency is reduced.
This product is IEC60950 compliant. Please see the test report and certification in the Conformance report section below.

特性 Features

• High Voltage Start-Up Circuit
• Improved efficiency at light load and fast startup time
• Critical conduction mode with current controlled frequency foldback
• Optimizes conversion efficiency across load range
• Integrated Input Filter Capacitor (X2) Discharge Circuitry
• Improved light load efficiency and elimination of external resistors
• Dynamic Response Enhancer
• Improved transient response for line and load steps
• Soft Overvoltage Protection
• Reduces acoustic noise and stress in the event of an overvoltage fault
• -500 mA/+800 mA Drive Capability
• Supports wide range of MOSFETs and power levels
• Two Vcc startup versions: 10.5 V (A & B) and 17 V (C & D)
• C & D versions allows smaller Vcc capacitor and faster startup in self biased applications
• AC Line Brownout Detection
• Protects boost stage power components during line fault conditions
• PFC Okay Output
• Can enable downstream controller of stable PFC rail

应用 Application

• Off-line power supplies
• Lighting Ballast
• LED Lighting Drivers and Power Supplies
• All-In-One Computers
• High Powered Adapters
• Flat TV / LED-TV / LCD-TV / Plasma

简介

NCP1615属于集成电路（IC）的PFC（功率因数校正）。由制造生产的NCP1615PFC（功率因数校正）功率因数校正 (PFC) 是用于调整交流电路中的电压和电流之间的相位角，使之趋近于零的半导体器件。不同模式包括平均电流、边界导通、连续导通、临界导通、电流控制式频率折返、不连续和不连续导通，开关频率从 6 kHz 至 1.7 MHz 可调。