The NCP1230 represents a major leap towards achieving low standby power in medium-to-high power Switched-Mode Power Supplies such as notebook adapters, off-line battery chargers and consumer electronics equipment. Housed in a compact 8-pin package (SOIC-8, SOIC-7, or PDIP-7), the NCP1230 contains all needed control functionality to build a rugged and efficient power supply.

Features

• Current-Mode Operation with Internal Ramp Compensation

• Internal High-Voltage Startup Current Source for Loss-Less Startup

• Extremely Low No-Load Standby Power

• Skip-Cycle Capability at Low Peak Currents

• Direct Connection to PFC Controller for Improved No-Load Standby Power

• Internal 2.5 ms Soft-Start

• Internal Leading Edge Blanking

• Latched Primary Overcurrent and Overvoltage Protection

• Short-Circuit Protection Independent of Auxiliary Level

• Internal Frequency Jittering for Improved EMI Signature

• +500 mA/-800 mA Peak Current Drive Capability

• Available in Three Frequency Options: 65 kHz, 100 kHz, and 133 kHz

• Direct Optocoupler Connection

• SPICE Models Available for TRANsient and AC Analysis

• Pb-Free Packages are Available

Typical Applications

• High Power AC-DC Adapters for Notebooks, etc.

• Offline Battery Chargers

• Set-Top Boxes Power Supplies, TV, Monitors, etc.

NCP1230D100R2属于集成电路（IC） > AC DC 转换器，离线开关。安森美半导体公司制造生产的NCP1230D100R2AC DC 转换器，离线开关该系列是元器件级控制产品，用于构建将交流市电转换为直流电（通常电压大幅降低）的设备。集成和未集成系统主要开关元件的器件均包括在内。由于高输入输出电压比，以及此类系统中通常需要隔离，这些器件通常与外部变压器配合使用。尽管通常使用定制变压器来实现此用途，但也有许多专门用于此用途的库存产品，请参见“开关转换器，SMPS 变压器”标题。