10 Mb/s Industrial Ethernet MAC PHY IC Controller

The NCN26010 device is an IEEE 802.3cg compliant Ethernet Transceiver including a Media Access Controller (MAC), a PLCA Reconciliation Sublayer (RS) and a 10BASE−T1S PHY designed for industrial multi−drop Ethernet. It provides all physical layer functions needed to transmit and receive data ov

文件：454.87 Kbytes 页数：57 Pages

ONSEMI

安森美半导体

Ethernet Controller, 10 Mb/s, Single-Pair, MAC + PHY, 802.3cg, 10BASE−T1S Compliant

The NCN26010 device is an IEEE 802.3cg compliant Ethernet Transceiver including a Media Access Controller (MAC), a PLCA Reconciliation Sublayer (RS) and a 10BASE−T1S PHY designed for industrial multi−drop Ethernet. It provides all physical layer functions needed to transmit and receive data over a s • Enhanced Noise Immunity Mode:- ENI extends the noise immunity to values well above the IEEE T1S standard- Allows the NCN26010 to withstand worst-case DPI and BCI immunity tests- Significantly improves the network reach when enabled, almost 2X better than competition- Unique to NCN26010\n• Lowest L;

ONSEMI

安森美半导体

丝印：26010；Package：TQFP；10 Mb/s Industrial Ethernet MAC PHY IC Controller

The NCN26010 device is an IEEE 802.3cg compliant Ethernet Transceiver including a Media Access Controller (MAC), a PLCA Reconciliation Sublayer (RS) and a 10BASE−T1S PHY designed for industrial multi−drop Ethernet. It provides all physical layer functions needed to transmit and receive data ov

文件：454.87 Kbytes 页数：57 Pages

ONSEMI

安森美半导体

NCN26010XMNEVB 10BASE-T1S MACPHY Evaluation Board

Features The NCN26010XMNEVB Eval board includes all circuitry to allow the board to act as a 10BASE−T1S MACPHY node, when connected to a host computer / MCU via SPI. The eval board NCN26010XMNEVB, carrying the NCN26010 has two RJ45 connectors that allow attaching a twisted single pair data

文件：848.08 Kbytes 页数：7 Pages

ONSEMI

安森美半导体

NCN26010XMNEVK 10BASE-T1S SPE Evaluation Kit

Features The evaluation kit consists of the NCN26010BMNEVB bridge board and the NCN26010XMNEVB 10BASE−T1S evaluation board. The bridge board provides a power connector that allows feeding the boards with a DC supply of anything between 8 V and 28 V. For full operation, when a Raspberry Pi Mo

文件：839.5 Kbytes 页数：11 Pages

ONSEMI

安森美半导体

丝印：26010；Package：QFN32；10 Mb/s Industrial Ethernet MAC PHY IC Controller

The NCN26010 device is an IEEE 802.3cg compliant Ethernet Transceiver including a Media Access Controller (MAC), a PLCA Reconciliation Sublayer (RS) and a 10BASE−T1S PHY designed for industrial multi−drop Ethernet. It provides all physical layer functions needed to transmit and receive data ov

文件：454.87 Kbytes 页数：57 Pages

ONSEMI

安森美半导体