NAFE11388B40BS中文资料数据手册PDF规格书

1 General description

The NAFE11388 is a highly configurable industrial-grade multichannel universal input analog front-end (AFE)

that meets high-precision measurement requirements. The device integrates low-leakage, high-voltage (HV)

fast multiplexers, low-offset and low-drift programmable gain amplifier (PGA) and buffers, high data-rate 24-bit

Delta-Sigma analog-to-digital converter (ADC), and low-drift voltage reference. All of the HV analog pins are

diode-protected internally for electromagnetic compatibility (EMC) and miswiring scenarios. The NAFE11388

is equipped with various diagnostic and supplies supervisory circuitry for condition monitoring and anomaly

detection. Two precise calibration voltage sources are made available for ease of end-to-end system selfcalibration

and predictive maintenance.

The NAFE11388 family of products is designed for programmable logic controllers (PLCs), I/O modules, data

loggers, instrumentation, and high-precision sensor and data acquisition systems.

2 Features and benefits

• Eight configurable HV inputs

– Single-ended or differential, with ranges up to ±25 V

– Independent configurations for voltage and current ranges

– Overvoltage protected up to ±36 V for less than one hour

• Fast data rates

– 7.5 SPS to 288 kSPS

– Simultaneous 50 Hz/60 Hz line rejection

– ENOB: 17-bit at 72 kSPS

• High accuracy

– 0.005 FS accuracy at room after user calibration

– 0.1 FS accuracy over -25 ℃ to 105 ℃

• System calibration

– End-to-end calibration with integrated precise voltage sources

– Accurate factory-calibrated products available

• ±3 ⁰C internal temperature sensor

• 0.2 internal oscillator accuracy at room temperature

• Diagnostic system for faults detection and prediction

• CRC error detection

• Ten GPIOs

• 32 MHz SPI interface

• Robust 7.5 kV HBM ESD and IEC61000-4-5 2 kV surge protection

• Power supply: HV: ±7 V to ±24 V, LV: 3.3 V

• 125 mW low power consumption

• Operating temperature range TA: -40 ℃ to +125 ℃

• Package: 64 pin, 9 mm x 9 mm x 0.85 mm HVQFN

3 Applications

• Data acquisition system

• PLC, DCS I/O modules

• Industrial automation and process control