MX29LV160AB数据手册MXIC中文资料规格书

描述 Description

GENERAL DESCRIPTION
The MX29LV160T/B & MX29LV160AT/AB is a 16-mega bit Flash memory organized as 2M bytes of 8 bits or 1M words of 16 bits. MXIC's Flash memories offer the most cost-effective and reliable read/write non-volatile random access memory. The MX29LV160T/B & MX29LV160AT/AB is packaged in 44-pin SOP, 48-pin TSOP and 48-ball CSP. It is designed to be reprogrammed and erased in system or in standard EPROM programmers.FEATURES
• Extended single - supply voltage range 2.7V to 3.6V
• 2,097,152 x 8/1,048,576 x 16 switchable
• Single power supply operation
   - 3.0V only operation for read, erase and program operation
• Fast access time: 70/90ns
• Low power consumption
   - 30mA maximum active current
   - 0.2uA typical standby current
• Command register architecture
   - Byte/word Programming (9us/11us typical)
   - Sector Erase (Sector structure 16K-Bytex1, 8K-Bytex2, 32K-Bytex1, and 64K-Byte x31)
• Auto Erase (chip & sector) and Auto Program
   - Automatically erase any combination of sectors with Erase Suspend capability.
   - Automatically program and verify data at specified address
• Erase Suspend/Erase Resume
   - Suspends sector erase operation to read data from, or program data to, any sector that is not being erased, then resumes the erase.
• Status Reply
   - Data polling & Toggle bit for detection of program and erase operation completion.
• Ready/Busy pin (RY/BY)
   - Provides a hardware method of detecting program or erase operation completion.
• Sector protection
   - Hardware method to disable any combination of sectors from program or erase operations
   - Temporary sector unprotect allows code changes in previously locked sectors.
• CFI (Common Flash Interface) compliant (for MX29LV160AT/AB)
   - Flash device parameters stored on the device and provide the host system to access
• 100,000 minimum erase/program cycles
• Latch-up protected to 100mA from -1V to VCC+1V
• Boot Sector Architecture
   - T = Top Boot Sector
   - B = Bottom Boot Sector
• Low VCC write inhibit is equal to or less than 1.4V
• Package type:
   - 44-pin SOP
   - 48-pin TSOP
   - 48-ball CSP (8x13mm:for MX29LV160T/B; 6x8mm:
for MX29LV160AT/AB)
• Compatibility with JEDEC standard
   - Pinout and software compatible with single-power supply Flash

特性 Features

• Extended single - supply voltage range 2.7V to 3.6V
• 2,097,152 x 8/1,048,576 x 16 switchable
• Single power supply operation
   - 3.0V only operation for read, erase and program operation
• Fast access time: 70/90ns
• Low power consumption
   - 30mA maximum active current
   - 0.2uA typical standby current
• Command register architecture
   - Byte/word Programming (9us/11us typical)
   - Sector Erase (Sector structure 16K-Bytex1, 8K-Bytex2, 32K-Bytex1, and 64K-Byte x31)
• Auto Erase (chip & sector) and Auto Program
   - Automatically erase any combination of sectors with Erase Suspend capability.
   - Automatically program and verify data at specified address
• Erase Suspend/Erase Resume
   - Suspends sector erase operation to read data from, or program data to, any sector that is not being erased, then resumes the erase.
• Status Reply
   - Data polling & Toggle bit for detection of program and erase operation completion.
• Ready/Busy pin (RY/BY)
   - Provides a hardware method of detecting program or erase operation completion.
• Sector protection
   - Hardware method to disable any combination of sectors from program or erase operations
   - Temporary sector unprotect allows code changes in previously locked sectors.
• CFI (Common Flash Interface) compliant (for MX29LV160AT/AB)
   - Flash device parameters stored on the device and provide the host system to access
• 100,000 minimum erase/program cycles
• Latch-up protected to 100mA from -1V to VCC+1V
• Boot Sector Architecture
   - T = Top Boot Sector
   - B = Bottom Boot Sector
• Low VCC write inhibit is equal to or less than 1.4V
• Package type:
   - 44-pin SOP
   - 48-pin TSOP
   - 48-ball CSP (8x13mm:for MX29LV160T/B; 6x8mm:
for MX29LV160AT/AB)
• Compatibility with JEDEC standard
   - Pinout and software compatible with single-power supply Flash