MX29F040集成电路（IC）的存储器规格书PDF中文资料

MX29F040属于集成电路（IC）的存储器。由旺宏电子股份有限公司制造生产的MX29F040存储器存储器是集成电路上用作数据存储设备的半导体器件。这些器件分为非易失性或易失性两种，格式包括 CBRAM、DRAM、EEPROM、EERAM、EPROM、闪存、FRAM、NVSRAM、PCM (PRAM)、PSRAM、RAM 和 SRAM。这些器件的存储容量为 64 b 至 6 Tb 不等，接口有 I2C、MMC、并行、eMMC、串行、单线、SPI、UFS、Xccela 总线和 1-线。

GENERAL DESCRIPTION

The MX29F040 is a 4-mega bit Flash memory organized as 512K bytes of 8 bits. MXICs Flash memories offer the most cost-effective and reliable read/write non-volatile random access memory. The MX29F040 is packaged in 32-pin PLCC, TSOP, PDIP. It is designed to be reprogrammed and erased in system or in standard EPROM programmers.

FEATURES

• 524,288 x 8 only

• Single power supply operation

- 5.0V only operation for read, erase and program operation

• Fast access time: 55/70/90/120ns

• Low power consumption

- 30mA maximum active current(5MHz)

- 1uA typical standby current

• Command register architecture

- Byte Programming (7us typical)

- Sector Erase 8 equal sectors of 64K-Byte each

• Auto Erase (chip & sector) and Auto Program

- Automatically erase any combination of sectors with Erase Suspend capability.

- Automatically program and verify data at specified address

• Erase suspend/Erase Resume

- Suspends an erase operation to read data from, or program data to, another sector that is not being erased, then resumes the erase.

• Status Reply

- Data polling & Toggle bit for detection of program and erase cycle completion.

• Sector protect/unprotect for 5V only system or 5V/ 12V system.

• Sector protection

- Hardware method to disable any combination of sectors from program or erase operations

• 100,000 minimum erase/program cycles

• Latch-up protected to 100mA from -1V to VCC+1V

• Low VCC write inhibit is equal to or less than 3.2V

• Package type:

- 32-pin PLCC, TSOP or PDIP

• Compatibility with JEDEC standard

- Pinout and software compatible with single-power supply Flash

• 20 years data retention