MX29F016中文资料16M-BIT [2M X 8] CMOS EQUAL SECTOR FLASH MEMORY数据手册MXIC规格书

描述 Description

GENERAL DESCRIPTION
The MX29F016 is a 16-mega bit Flash memory organized as 2M bytes of 8 bits. MXIC's Flash memories offer the most cost-effective and reliable read/write non-volatile random access memory. The MX29F016 is packaged in 40-pin TSOP or 44-pin SOP, 48-pin TSOP. It is designed to be reprogrammed and erased in system or in standard EPROM programmers.FEATURES
• Single power supply 5V operation for read, erase and program
• Fast access time: 90/120ns
• Low power consumption
   - 30mA maximum active current
   - 0.2uA typical standby current
• Command register architecture
   - Byte Programming (7us typical)
   - Sector Erase:32 equal sector with of 64KByte each
• Auto Erase (chip & sector) and Auto Program
   - Automatically erase any combination of sectors with Erase Suspend capability.
   - Automatically program and verify data at specified address
• Erase suspend/Erase Resume
   - Suspends an erase operation to read data from, or program data to, another sector that is not being erased, then resumes the erase.
• Status Reply
   - Data polling & Toggle bit for detection of program and erase cycle completion.
• Group Sector protect/unprotect for 5V/12V system.
• Group Sector protection
   - Hardware sector protect/unprotect method for each group which consists of two adjacent sectors
   - Temporary group sector unprotect allows code changes in previously locked sectors
• 100,000 minimum erase/program cycles
• Latch-up protected to 100mA from -1V to VCC+1V
• Low VCC write inhibit is equal to or less than 3.2V
• Package type:
   - 40-pin TSOP, 44-pin SOP, 48-pin TSOP
• Compatibility with JEDEC standard
   - Pinout and software compatible with single-power supply Flash

特性 Features

• Single power supply 5V operation for read, erase and program
• Fast access time: 90/120ns
• Low power consumption
   - 30mA maximum active current
   - 0.2uA typical standby current
• Command register architecture
   - Byte Programming (7us typical)
   - Sector Erase:32 equal sector with of 64KByte each
• Auto Erase (chip & sector) and Auto Program
   - Automatically erase any combination of sectors with Erase Suspend capability.
   - Automatically program and verify data at specified address
• Erase suspend/Erase Resume
   - Suspends an erase operation to read data from, or program data to, another sector that is not being erased, then resumes the erase.
• Status Reply
   - Data polling & Toggle bit for detection of program and erase cycle completion.
• Group Sector protect/unprotect for 5V/12V system.
• Group Sector protection
   - Hardware sector protect/unprotect method for each group which consists of two adjacent sectors
   - Temporary group sector unprotect allows code changes in previously locked sectors
• 100,000 minimum erase/program cycles
• Latch-up protected to 100mA from -1V to VCC+1V
• Low VCC write inhibit is equal to or less than 3.2V
• Package type:
   - 40-pin TSOP, 44-pin SOP, 48-pin TSOP
• Compatibility with JEDEC standard
   - Pinout and software compatible with single-power supply Flash